首站-论文投稿智能助手
典型文献
Counter-balancing effects of Si on C partitioning and stacking fault energy of austenite in 10Mn quenching and partitioning steel
文献摘要:
Silicon is an essential alloying element in quenching and partitioning(Q&P)steels,because it is known to suppress carbide precipitation during partitioning step and promote carbon partitioning to stabilize austenite.When 2 wt%Si was added to 10Mn-2AI-0.2C steel,the size and fraction of the carbides formed during partitioning became smaller than in the Si-free counterpart.Moreover,the suppression of carbide formation promoted C partitioning into austenite as expected.However,austenite stability was always lower with Si under the equivalent partitioning condition because Si effectively decreased the stacking fault energy of austenite.As partitioning progressed,the both yield and tensile strengths of the Si-added steel exceeded that of the Si-free steel with the similar ductility level.This was because Si was an ef-fective solid solution strengthener,and the austenite in the Si-added steel exhibited the appropriate sta-bility to gradually transform into martensite throughout the deformation.The resulting strengthening effect compensated for the softening caused by martensite recovery.Consequently,strain hardening rate decreased continuously throughout deformation,which resulted in high tensile strength and ductility.
文献关键词:
作者姓名:
Dong Hwi Kim;Jee-Hyun Kang;Hojun Gwon;Joo Hyun Ryu;Sung-Joon Kim
作者机构:
Graduate Institute for Ferrous Technology,Pohang University of Science and Technology,Pohang 37673,Republic of Korea;School of Materials Science and Engineering,Institute of Materials Technology,Yeungnam University,Gyeongsan 38541,Republic of Korea;POSCO Technical Research Laboratories.POSCO,Gwangyang 57807,Republic of Korea
引用格式:
[1]Dong Hwi Kim;Jee-Hyun Kang;Hojun Gwon;Joo Hyun Ryu;Sung-Joon Kim-.Counter-balancing effects of Si on C partitioning and stacking fault energy of austenite in 10Mn quenching and partitioning steel)[J].材料科学技术(英文版),2022(03):248-257
A类:
strengthener
B类:
Counter,balancing,effects,partitioning,stacking,fault,energy,austenite,10Mn,quenching,Silicon,essential,alloying,element,steels,because,known,precipitation,during,step,carbon,stabilize,When,wt,was,added,2AI,2C,size,fraction,carbides,formed,became,smaller,than,free,counterpart,Moreover,suppression,promoted,into,expected,However,stability,always,lower,under,equivalent,condition,effectively,decreased,progressed,both,yield,tensile,strengths,exceeded,that,similar,ductility,level,This,solid,solution,exhibited,appropriate,gradually,transform,martensite,throughout,deformation,resulting,strengthening,compensated,softening,caused,by,recovery,Consequently,strain,hardening,rate,continuously,which,resulted,high
AB值:
0.494368
相似文献
Novel method for improving iron recovery from electric arc furnace slag:on-site hot modification
Xiang Lu;Xiao-li Huang;Ru-fei Wei;Wen Chen;Da-qiang Cang;Fei-hua Yang;Chun-lei Pu-Changsha Research Institute of Mining&Metallurgy Co.,Ltd.,Changsha 410012,Hunan,China;School of Metallurgy and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;Technological Institute of Development and Strategy Studies,Panzhihua 617000,Sichuan,China;School of Metallurgical Engineering,Anhui University of Technology,Ma'anshan 243000,Anhui,China;State Key Laboratory of Solid Waste Reuse for Building Materials(SKL-SWR),Beijing Building Materials Academy of Sciences Research(BBMA),Beijing 100083,China;Iron and Steel Technology Research Institute,HUATIAN Engineering&Technology Corporation,MCC,Nanjing 210019,Jiangsu,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。