首站-论文投稿智能助手
典型文献
Evolution of microstructure in reheated coarse-grained zone of G115 novel martensitic heat-resistant steel
文献摘要:
Based on the thermal simulation method,a systematical analysis was conducted on the effect of welding peak temperature and the cooling time that takes place from 800 to 500℃on microstructure,precipitates,substructure and microhardness of the reheated coarse-grained heat-affected zone(CGHAZ)of G115 novel martensitic heat-resistant steel.As revealed from the results,the microstructure of un-altered CGHAZ(UACGHAZ)and supercritically CGHAZ(SCCGHAZ)was lath martensite,and structural heredity occurred.Intercritically reheated CGHAZ(IRCGHAZ)exhibited martensite and over-tempered martensite,and subcritical CGHAZ(SCGHAZ)displayed martensite and under-tempered martensite.The austenite in UACGHAZ and SCCGHAZ was transformed with the diffusion mechanism during the first thermal cycle,but with the non-diffusion mechanism during the second thermal cycle.For this reason,Ac1 and Ac3 during the second thermal cycle were significantly lower than those during the first thermal cycle,and Ac1 and Ac3 were reduced by nearly 14 and 44℃,respectively.Since the content and stability of the austenite alloy during the second thermal cycle of IRCGHAZ were lower than those during the first thermal cycle,Ms increased by nearly 30℃.There were considerable precipitates in the over-tempered region of IRCGHAZ,and the Laves phase was contained,which was not conducive to high-temperature creep property.Moreover,the dislocation density and the number of sub-grains in the region were lower,resulting in a sharp decrease in the microhardness,and it was the weak area in the reheated CGHAZ.
文献关键词:
作者姓名:
Zhong-yi Chen;Zheng-zong Chen;Dong-xu Kou;Yong-qing Li;Yong-lin Ma;Yi-ming Li
作者机构:
School of Material and Metallurgy,Inner Mongolia University of Science and Technology,Baotou 014010,Inner Mongolia,China;Institute for Special Steels,China Iron and Steel Research Institute,Beijing 100081,China;Technology Center,Inner Mongolia North Heavy Industry Group Co.,Ltd.,Baotou 014010,Inner Mongolia,China;Key Laboratory of Advanced Metals and Materials of Inner Mongolia of Materials and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,Inner Mongolia,China
引用格式:
[1]Zhong-yi Chen;Zheng-zong Chen;Dong-xu Kou;Yong-qing Li;Yong-lin Ma;Yi-ming Li-.Evolution of microstructure in reheated coarse-grained zone of G115 novel martensitic heat-resistant steel)[J].钢铁研究学报(英文版),2022(02):327-338
A类:
reheated,UACGHAZ,supercritically,SCCGHAZ,Intercritically,IRCGHAZ,SCGHAZ
B类:
Evolution,microstructure,coarse,grained,zone,G115,novel,martensitic,resistant,steel,Based,thermal,simulation,method,systematical,analysis,was,conducted,effect,welding,peak,temperature,cooling,that,takes,place,from,precipitates,substructure,microhardness,affected,revealed,results,altered,lath,martensite,structural,heredity,occurred,exhibited,tempered,subcritical,displayed,under,austenite,transformed,diffusion,mechanism,during,first,cycle,but,second,For,this,reason,Ac1,Ac3,were,significantly,lower,than,those,reduced,by,nearly,respectively,Since,content,stability,alloy,Ms,increased,There,considerable,region,Laves,phase,contained,which,not,conducive,high,creep,property,Moreover,dislocation,density,number,grains,resulting,sharp,decrease,weak,area
AB值:
0.41296
相似文献
Revealing essence of magnetostructural coupling of Ni-Co-Mn-Ti alloys by first-principles calculations and experimental verification
Zi-Qi Guan;Jing Bai;Yu Zhang;Jiang-Long Gu;Xin-Jun Jiang;Xin-Zeng Liang;Run-Kai Huang;Yu-Dong Zhang;Claude Esling;Xiang Zhao;Liang Zuo-Key Laboratory for Anisotropy and Texture of Materials,School of Material Science and Engineering,Northeastern University,Shenyang 110819,China;School of Resources and Materials,Northeastern University at Qinhuangdao,Qinhuangdao 066004,China;State Key Laboratory of Metastable Materials Science and Technology,Yanshan University,Qinhuangdao 066004,China;Hebei Provincial Laboratory for Dielectric and Electrolyte Functional Materials,Qinhuangdao 066004,China;Laboratoire d'étude des Microstructures et de Mécanique des Matériaux,University of Lorraine,Metz 57045,France
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。