首站-论文投稿智能助手
典型文献
Integrated slipper retainer mechanism to eliminate slipper wear in high-speed axial piston pumps
文献摘要:
The power density of axial piston pumps can greatly benefit from increasing the speed level.However,traditional slippers in axial piston pumps are exposed to continuous sliding on the swash plate,suffering from serious wear at high rotational speeds.Therefore,this paper presents a new integrated slipper retainer mechanism for high-speed axial piston pumps,which can avoid direct contact between the slippers and the swash plate and thereby eliminate slipper wear under severe operating conditions.A lubrication model was developed for this specific slipper retainer mechanism,and experiments were carried out on a pump prototype operating at high rotational speed up to 10000 r/min.Experimental results qualitatively validated the theoretical model and confirmed the effectiveness of the new slipper design.
文献关键词:
作者姓名:
Qun CHAO;Junhui ZHANG;Bing XU;Qiannan WANG;Fei LYU;Kun LI
作者机构:
State Key Laboratory of Mechanical System and Vibration,School of Mechanical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China;State Key Laboratory of Fluid Power and Mechatronic Systems,School of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China;Qing'an Group Co.,Ltd,Xi'an 710077,China
文献出处:
引用格式:
[1]Qun CHAO;Junhui ZHANG;Bing XU;Qiannan WANG;Fei LYU;Kun LI-.Integrated slipper retainer mechanism to eliminate slipper wear in high-speed axial piston pumps)[J].机械工程前沿,2022(01):196-208
A类:
slipper,retainer,slippers
B类:
Integrated,mechanism,eliminate,wear,high,axial,piston,pumps,power,density,can,greatly,benefit,from,increasing,level,However,traditional,are,exposed,continuous,sliding,swash,plate,suffering,serious,rotational,speeds,Therefore,this,paper,presents,new,integrated,which,avoid,direct,contact,between,thereby,under,severe,operating,conditions,lubrication,model,developed,specific,experiments,were,carried,out,prototype,up,Experimental,results,qualitatively,validated,theoretical,confirmed,effectiveness,design
AB值:
0.459626
相似文献
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant:From mechanisms to application
Xin CUI;Changhe LI;Wenfeng DING;Yun CHEN;Cong MAO;Xuefeng XU;Bo LIU;Dazhong WANG;Hao Nan LI;Yanbin ZHANG;Zafar SAID;Sujan DEBNATH;Muhammad JAMIL;Hafiz Muhammad ALI;Shubham SHARMA-School of Mechanical and Automotive Engineering,Qingdao University of Technology,Qingdao 266520,China;College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Chengdu Tool Research Institute Co.,Ltd.Chengdu 610500,China;College of Automotive and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410114,China;Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education&Zhejiang Province,Zhejiang University of Technology,Hangzhou 310032,China;Sichuan Future Aerospace Industry LLC.,Shifang 618400,China;School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China;School of Aerospace,University of Nottingham Ningbo China,Ningbo 315100,China;College of Engineering,University of Sharjah,Sharjah 27272,United Arab Emirates;Mechanical Engineering Department,Curtin University,Miri 98009,Malaysia;Mechanical Engineering Department,King Fahd University of Petroleum and Minerals,Dhahran 31261,Saudi Arabia;Department of Mechanical Engineering and Advanced Materials Science,Council of Scientific and Industrial Research(CSIR)-Central Leather Research Institute(CLRI),Regional Center for Extension and Development,Jalandhar 144021,India
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。