首站-论文投稿智能助手
典型文献
Enhanced galloping energy harvester with cooperative mode of vibration and collision
文献摘要:
The low power and narrow speed range remain bottlenecks that constrain the application of small-scale wind energy harvesting.This paper proposes a simple,low-cost,and reliable method to address these critical issues.A galloping energy harvester with the cooperative mode of vibration and collision(GEH-VC)is presented.A pair of curved boundaries attached with functional materials are introduced,which not only improve the performance of the vibration energy harvesting system,but also convert more mechanical energy into electrical energy during collision.The beam deforms and the piezoelectric energy harvester(PEH)generates electricity during the flow-induced vibration.In addition,the beam contacts and separates from the boundaries,and the triboelectric nanogenerator(TENG)generates electricity during the collision.In order to reduce the influence of the boundaries on the aerodynamic performance and the feasibility of increasing the working area of the TENG,a vertical structure is designed.When the wind speed is high,the curved boundaries maintain a stable amplitude of the vibration system and increase the frequency of the vibration system,thereby avoiding damage to the piezoelectric sheet and improving the electromechanical conversion efficiency,and the TENG works with the PEH to generate electricity.Since the boundaries can protect the PEH at high wind speeds,its stiffness can be designed to be low to start working at low wind speeds.The electromechanical coupling dynamic model is established according to the GEH-VC operating principle and is verified experimentally.The results show that the GEH-VC has a wide range of operating wind speeds,and the average power can be increased by 180%compared with the traditional galloping PEH.The GEH-VC prototype is demonstrated to power a commercial temperature sensor.This study provides a novel perspective on the design of hybrid electromechanical conversion mechanisms,that is,to combine and collaborate based on their respective characteristics.
文献关键词:
作者姓名:
Qiong WANG;Zewen CHEN;Linchuan ZHAO;Meng LI;Hongxiang ZOU;Kexiang WEI;Xizheng ZHANG;Wenming ZHANG
作者机构:
Hunan Provincial Key Laboratory of Vehicle Power and Transmission System,Hunan Institute of Engineering,Xiangtan 411104,Hunan Province,China;State Key Laboratory of Mechanical System and Vibration,School of Mechanical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China
引用格式:
[1]Qiong WANG;Zewen CHEN;Linchuan ZHAO;Meng LI;Hongxiang ZOU;Kexiang WEI;Xizheng ZHANG;Wenming ZHANG-.Enhanced galloping energy harvester with cooperative mode of vibration and collision)[J].应用数学和力学(英文版),2022(07):945-958
A类:
GEH
B类:
Enhanced,galloping,energy,harvester,cooperative,vibration,collision,power,narrow,range,remain,bottlenecks,that,constrain,application,small,scale,wind,harvesting,This,paper,proposes,simple,cost,reliable,method,address,these,critical,issues,VC,presented,pair,curved,boundaries,attached,functional,materials,introduced,which,not,only,improve,performance,system,but,also,convert,more,into,electrical,during,beam,deforms,piezoelectric,PEH,generates,electricity,flow,induced,In,addition,contacts,separates,from,triboelectric,nanogenerator,TENG,order,reduce,influence,aerodynamic,feasibility,increasing,working,area,vertical,structure,designed,When,high,maintain,stable,amplitude,frequency,thereby,avoiding,damage,sheet,improving,electromechanical,conversion,efficiency,works,Since,can,protect,speeds,its,stiffness,start,coupling,model,established,according,operating,principle,verified,experimentally,results,show,has,wide,average,increased,compared,traditional,prototype,demonstrated,commercial,temperature,sensor,study,provides,novel,perspective,hybrid,mechanisms,combine,collaborate,their,respective,characteristics
AB值:
0.492557
相似文献
Additive manufacturing of metals:Microstructure evolution and multistage control
Zhiyuan Liu;Dandan Zhao;Pei Wang;Ming Yan;Can Yang;Zhangwei Chen;Jian Lu;Zhaoping Lu-Additive Manufacturing Institute,College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China;Department of Materials Science and Engineering,Southern University of Science and Technology,Shenzhen 518055,China;Sino-German College of Intelligent Manufacturing,Shenzhen Technology University,Shenzhen 518118,China;CityU-Shenzhen Futian Research Institute,Shenzhen 518045,China;Hong Kong Branch of National Precious Metals Material Engineering Research Center(NPMM),City University of Hong Kong,Hong Kong,China;Beijing Advanced Innovation Center for Materials Genome Engineering,State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China
In situ neutron diffraction unravels deformation mechanisms of a strong and ductile FeCrNi medium entropy alloy
L.Tang;F.Q.Jiang;J.S.Wróbel;B.Liu;S.Kabra;R.X.Duan;J.H.Luan;Z.B.Jiao;M.M.Attallah;D.Nguyen-Manh;B.Cai-School of Metallurgy and Materials,University of Birmingham,B15 2TT,United Kingdom;Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;Faculty of Materials Science and Engineering,Warsaw University of Technology,ul.Wo?oska 141,Warsaw 02-507,Poland;State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083,China;Rutherford Appleton Laboratory,ISIS Facility,Didcot OX11 0QX,United Kingdom;Department of Materials Science and Engineering,City University of Hong Kong,Kowloon,Hong Kong,China;Department of Mechanical Engineering,The Hong Kong Polytechnic University,Hung Hom,Hong Kong,China;CCFE,United Kingdom Atomic Energy Authority,Abingdon,Oxfordshire OX14 3DB,United Kingdom
Highly transmitted silver nanowires-SWCNTs conductive flexible film by nested density structure and aluminum-doped zinc oxide capping layer for flexible amorphous silicon solar cells
Shunliang Gao;Xiaohui Zhao;Qi Fu;Tianchi Zhang;Jun Zhu;Fuhua Hou;Jian Ni;Chengjun Zhu;Tiantian Li;Yanlai Wang;Vignesh Murugadoss;Gaber A.M.Mersal;Mohamed M.Ibrahim;Zeinhom M.El-Bahy;Mina Huang;Zhanhu Guo-The Key Laboratory of Semiconductor Photovoltaic Technology at Universities of Inner Mongolia Autonomous Region,College of Physical Science and Technology,Inner Mongolia University,Hohhot 010021,China;Department of Electronic Science and Technology,School of Electronic Information and Optical Engineering,Nankai University,Tianjin 300350,China;Advanced Materials Division,Engineered Multifunctional Composites(EMC)Nanotech LLC,Knoxville,TN 37934,United States;Integrated Composites Laboratory(ICL),Department of Chemical and Bimolecular Engineering,University of Tennessee,Knoxville,TN 37996,United States;Department of Chemistry,College of Science,Taif University,P.O.Box 11099,Taif 21944,Saudi Arabia;Department of Chemistry,Faculty of Science,Al-Azhar University,Nasr City 11884,Cairo,Egypt;College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。