首站-论文投稿智能助手
典型文献
Fabrication of Intracranial Vascular Nitinol Alloy Stents with Improved Mechanical Property and Endothelialization Function
文献摘要:
Intracranial vascular stenting has been widely used for ischemic stroke.However,there are complication risks with stent implantation,such as poor wall apposition,stent migration,thromboembolism and stent restenosis,due to the mismatched radial force and conformability of the stents.Therefore,a novel intracranial vascular nitinol stent was fabricated in order to improve mechanical property and endothelialization function.The bending moment of the stents was calculated to be 0.346 N mm,which shows improved conformability.The radial force of the stents evaluated by the flat plate test was 0.0112 N/mm,within the range of the commercially available stent force(0.0065-0.0116 N/mm).Furthermore,the Tyr-Ile-Gly-Ser-Arg(YIGSR)peptide derived from laminin was grafted onto the stent surfaces to promote endothelialization on vascular stents evaluated by the proliferation,adhesion and migration of human umbilical vein endothelial cells in vitro.The nitinol stents with improved mechanical property and endothelialization function are expected to reduce the recurrence risk of ischemic stroke after implantation.
文献关键词:
作者姓名:
Yangyang Yan;Na Li;Feng Guo;Anhua Wu;Wei Jin;Rui Yang;Yun Bai;Xing Zhang
作者机构:
Shi-Changxu Innovation Center for Advanced Materials,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,China;College of Life Science and Engineering,Shenyang University,Shenyang 110044,China;Department of Neurosurgery,The First Affiliated Hospital of China Medical University,Shenyang 110001,China
引用格式:
[1]Yangyang Yan;Na Li;Feng Guo;Anhua Wu;Wei Jin;Rui Yang;Yun Bai;Xing Zhang-.Fabrication of Intracranial Vascular Nitinol Alloy Stents with Improved Mechanical Property and Endothelialization Function)[J].金属学报(英文版),2022(12):2069-2081
A类:
Nitinol,Endothelialization,apposition,conformability,nitinol,endothelialization,YIGSR
B类:
Fabrication,Intracranial,Vascular,Alloy,Stents,Improved,Mechanical,Property,Function,vascular,stenting,has,been,widely,used,ischemic,stroke,However,there,are,complication,risks,implantation,such,poor,wall,migration,thromboembolism,restenosis,due,mismatched,radial,force,stents,Therefore,novel,intracranial,was,fabricated,order,mechanical,property,function,bending,moment,calculated,which,shows,improved,evaluated,by,flat,plate,test,within,range,commercially,available,Furthermore,Tyr,Ile,Gly,Ser,Arg,peptide,derived,from,laminin,grafted,onto,surfaces,promote,proliferation,adhesion,human,umbilical,vein,cells,vitro,expected,reduce,recurrence,after
AB值:
0.522832
相似文献
Effect of Filler Content on Flexural and Viscoelastic Properties of Coir Fibers and Argania Nut-shells Reinforced Phenolic Resin Composites
Hala Bensalah;Marya Raji;Kamal Gueraoui;Abdelazziz Khtira;Hamid Essabir;Rachid Bouhfid;Abou el kacem Qaiss-Group of Mechanics and Materials,Energy Research Center,Faculty of Science,Mohammed V University in Rabat,10100 Rabat,Morocco;Composites and Nanocomposites Center,Moroccan Foundation for Advanced Science,Innovation and Research(MAScIR),10100 Rabat,Morocco;Mohammed Ⅵ Polytechnic University,Lot 660 Hay Moulay Rachid,43150 Ben Guerir,Morocco;Group of Simulation in Mechanics and Energy,Energy Research Center,Faculty of Science,Mohammed ⅤUniversity,10100 Rabat,Morocco;Group of Semiconductors and Environmental Sensor Technologies,Energy Research Center,Faculty of Science,Mohammed V University,10100 Rabat,Morocco;Mechanic Materials and Composites(MMC),Laboratory of Energy Engineering,Materials and Systems,National School of Applied Sciences of Agadir,Ibn Zohr University,80000 Agadir,Morocco
Highly transmitted silver nanowires-SWCNTs conductive flexible film by nested density structure and aluminum-doped zinc oxide capping layer for flexible amorphous silicon solar cells
Shunliang Gao;Xiaohui Zhao;Qi Fu;Tianchi Zhang;Jun Zhu;Fuhua Hou;Jian Ni;Chengjun Zhu;Tiantian Li;Yanlai Wang;Vignesh Murugadoss;Gaber A.M.Mersal;Mohamed M.Ibrahim;Zeinhom M.El-Bahy;Mina Huang;Zhanhu Guo-The Key Laboratory of Semiconductor Photovoltaic Technology at Universities of Inner Mongolia Autonomous Region,College of Physical Science and Technology,Inner Mongolia University,Hohhot 010021,China;Department of Electronic Science and Technology,School of Electronic Information and Optical Engineering,Nankai University,Tianjin 300350,China;Advanced Materials Division,Engineered Multifunctional Composites(EMC)Nanotech LLC,Knoxville,TN 37934,United States;Integrated Composites Laboratory(ICL),Department of Chemical and Bimolecular Engineering,University of Tennessee,Knoxville,TN 37996,United States;Department of Chemistry,College of Science,Taif University,P.O.Box 11099,Taif 21944,Saudi Arabia;Department of Chemistry,Faculty of Science,Al-Azhar University,Nasr City 11884,Cairo,Egypt;College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。