首站-论文投稿智能助手
典型文献
The Synthetic and Mechanical Properties of a Silica Matrix Cermet Composite
文献摘要:
A cermet composite was prepared by employing thermal spraying flame onto stainless steel surfaces of (304) type. Hence 25,50% of aluminum was mixed with matrix of (10% Al2O3- SiO2). A spray system consistis of oxygen barrel, acetylene and spray gun that contains powders feeder at different spray distances (5, 10, 15, 20 and 25 cm). The thermal treatment of the samples resulting from spraying was performed at 1100 ℃ for 1.5 hr. Some physical examinations (porosity and adhesion), mechanical tests (hardness and wear rate) and Atomic Force Microscope (AFM) test were performed before and after thermal treatment. The test results showed that the best mixing rate was (50%) and the best spray distance was (15cm) where the quality of coating layer improved after thermal treatment at 1100 ℃ for 1.5 hr with a porosity ratio reduced from 11.2% to 6.6%, and adhesion strength improved with the increase in the alumina content to 50%. The results demonstrated that the best adhesion value after thermal treatment was 30.98 MPa. The hardness of coating layer increased from 45.78 to 54.88 HV; while the lowest rate of wear was at 50% of alumina with a spray distance of 15cm. Also, there was a clear improvement based on AFM within grain size, root mean square and roughness rate.
文献关键词:
作者姓名:
Sufian H Humeedi;Saadoon M Abdulkareem;Salih Y Darweesh
作者机构:
Department of Physics,College of Science,Tikrit University,Tikrit,Iraq;Physics Department,College of Education,Samaraa Univer-sity,Samaraa,Iraq;Physics Department,College of Education TuzKhurmatu,Tikrit University,Tikrit,Iraq
引用格式:
[1]Sufian H Humeedi;Saadoon M Abdulkareem;Salih Y Darweesh-.The Synthetic and Mechanical Properties of a Silica Matrix Cermet Composite)[J].武汉理工大学学报(材料科学版)(英文版),2022(03):423-428
A类:
Cermet,consistis
B类:
Synthetic,Mechanical,Properties,Silica,Matrix,Composite,cermet,composite,was,prepared,by,employing,thermal,spraying,flame,onto,stainless,steel,surfaces,type,Hence,aluminum,mixed,matrix,Al2O3,SiO2,system,oxygen,barrel,acetylene,gun,that,contains,powders,feeder,different,distances,treatment,samples,resulting,from,performed,hr,Some,physical,examinations,porosity,adhesion,mechanical,tests,hardness,wear,Atomic,Force,Microscope,AFM,were,before,after,results,showed,best,mixing,15cm,where,quality,coating,layer,improved,ratio,reduced,strength,alumina,content,demonstrated,value,increased,HV,while,lowest,Also,there,clear,improvement,within,grain,size,root,mean,square,roughness
AB值:
0.552695
相似文献
Performance Evaluation of Calcium Alkali-treated Oil Palm/Pineapple Fibre/Bio-phenolic Composites
Sameer A.Awad;Hassan Fouad;Eman M.Khalaf;N.Saba;Hom N.Dhakal;M.Jawaid;Othman Y.Alothman-Department of Chemistry,School of Science and Technology,University of New England,Armidale,NSW 2351,Australia;Department of Chemistry,College of Education for Pure Science,University of Al-Anbar,Ramadi 31001,Iraq;Biomedical Engineering Department,Faculty of Engineering,Helwan University,Helwan 11792,Egypt;Pharmacy Department,Al-Maarif University College,Anbar 3001 Ramadi,Iraq;Laboratory of Biocomposite Technology,Institute of Tropical Forestry and Forest Products(INTROP),Universiti Putra Malaysia,43400 Serdang,Malaysia;Advanced Polymers and Composites(APC)Research Group,School of Mechanical and Design Engineering,University of Portsmouth,Portsmouth P 3DJ,UK;Department of Chemical Engineering,College of Engineering,King Saud University,Riyadh 11433,Saudi Arabia
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。