FAILED
首站-论文投稿智能助手
典型文献
Corrosion–wear behavior of a biocompatible magnesium matrix composite in simulated body fluid
文献摘要:
Magnesium matrix composites are a new generation of biocompatible implant materials, but they will inevitably undergo simultaneous wear and corrosion in the human body. In this study, hydroxyapatite (Ca10(PO4)6(OH)2, HA) is used in a magnesium matrix composite to study its effects on the corrosion–wear behavior. Two samples (a magnesium alloy composed of Mg, Zn, and Zr (ZK60) alloy and ZK60/10HA composite) were fabricated using the powder metallurgy (PM) process. Their corrosion–wear behavior was investigated using the sliding wear test in a simulated body fluid (SBF). At all the sliding velocities tested, the corrosion– wear resistance of ZK60/10HA was superior to ZK60. At a sliding velocity of 942.5 mm/min, ZK60/10HA demonstrated a 42% improvement in corrosion–wear resistance compared to ZK60. For ZK60, the main wear mechanism under dry conditions was abrasion, while the wear mechanisms in the SBF were abrasion and corrosion. For ZK60/10HA, the wear mechanisms under dry conditions were abrasion and delamination, while in SBF they were mainly abrasion and corrosion, accompanied by slight delamination. The results indicated that HA particles can be used as an effective corrosion–wear inhibitor in biocompatible magnesium matrix composites.
文献关键词:
作者姓名:
Jinlong SU;Jie TENG;Zili XU;Yuan LI
作者机构:
College of Materials Science and Engineering,Hunan University,Changsha 410082,China;The First Affiliated Hospital,Hunan Normal University,Changsha 410006,China
文献出处:
引用格式:
[1]Jinlong SU;Jie TENG;Zili XU;Yuan LI-.Corrosion–wear behavior of a biocompatible magnesium matrix composite in simulated body fluid)[J].摩擦(英文),2022(01):31-43
A类:
10HA
B类:
Corrosion,wear,behavior,biocompatible,magnesium,matrix,simulated,body,fluid,Magnesium,composites,new,generation,implant,materials,but,they,will,inevitably,undergo,simultaneous,corrosion,human,In,this,study,hydroxyapatite,Ca10,PO4,used,its,effects,Two,samples,alloy,composed,Mg,Zr,ZK60,were,fabricated,using,powder,metallurgy,PM,process,Their,was,investigated,sliding,SBF,At,velocities,tested,resistance,superior,velocity,demonstrated,improvement,compared,For,dry,conditions,abrasion,while,mechanisms,delamination,mainly,accompanied,by,slight,results,indicated,that,particles,can,effective,inhibitor
AB值:
0.408309
相似文献
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant:From mechanisms to application
Xin CUI;Changhe LI;Wenfeng DING;Yun CHEN;Cong MAO;Xuefeng XU;Bo LIU;Dazhong WANG;Hao Nan LI;Yanbin ZHANG;Zafar SAID;Sujan DEBNATH;Muhammad JAMIL;Hafiz Muhammad ALI;Shubham SHARMA-School of Mechanical and Automotive Engineering,Qingdao University of Technology,Qingdao 266520,China;College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Chengdu Tool Research Institute Co.,Ltd.Chengdu 610500,China;College of Automotive and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410114,China;Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education&Zhejiang Province,Zhejiang University of Technology,Hangzhou 310032,China;Sichuan Future Aerospace Industry LLC.,Shifang 618400,China;School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China;School of Aerospace,University of Nottingham Ningbo China,Ningbo 315100,China;College of Engineering,University of Sharjah,Sharjah 27272,United Arab Emirates;Mechanical Engineering Department,Curtin University,Miri 98009,Malaysia;Mechanical Engineering Department,King Fahd University of Petroleum and Minerals,Dhahran 31261,Saudi Arabia;Department of Mechanical Engineering and Advanced Materials Science,Council of Scientific and Industrial Research(CSIR)-Central Leather Research Institute(CLRI),Regional Center for Extension and Development,Jalandhar 144021,India
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。