首站-论文投稿智能助手
典型文献
Effect of extrusion process on microstructure and mechanical and corrosion properties of biodegradable Mg–5Zn–1.5Y magnesium alloy
文献摘要:
The effect of extrusion temperature and ratio on the microstructure, hardness, compression, and corrosion behavior of Mg–5Zn–1.5Y alloy were analyzed in this study. The microstructural observations revealed that the cast alloy consists of α-Mg grains, and Mg3Zn6Y and Mg3Zn3Y2 intermetallic compounds, mostly located on the α-Mg grain boundaries. Extruded alloy at higher temperatures showed coarser grain microstructures, whereas those extruded at higher ratios contained finer ones, although more dynamic recrystalized grains with lower intermetallics were measured at both conditions. Combined conditions of the lower temperature (340℃) and higher ratio (1:11.5) provided higher compressive strengths. However, no significant hardness improvement was achieved. The extrusion process could decrease the corrosion rate of the cast alloy in simulated body fluid for over 80% due to primarily the refined microstructure. The extrusion temperature showed a more pronounced effect on corrosion resistance compared to the extrusion ratio, and the higher the extrusion temperature, the higher the corrosion resistance.
文献关键词:
作者姓名:
Hassan Jafari;Amir Houshang Mojiri Tehrani;Mojiri Tehrani;Mahsa Heydari
作者机构:
Materials Engineering Department, Faculty of Materials Engineering and Interdisciplinary Science, Shahid Rajaee Teacher Training University, 16785-136 Tehran, Iran
引用格式:
[1]Hassan Jafari;Amir Houshang Mojiri Tehrani;Mojiri Tehrani;Mahsa Heydari-.Effect of extrusion process on microstructure and mechanical and corrosion properties of biodegradable Mg–5Zn–1.5Y magnesium alloy)[J].矿物冶金与材料学报,2022(03):490-502
A类:
Mg3Zn6Y,Mg3Zn3Y2,recrystalized
B类:
Effect,extrusion,process,mechanical,corrosion,properties,biodegradable,5Zn,5Y,magnesium,alloy,effect,hardness,compression,behavior,were,analyzed,this,study,microstructural,observations,revealed,that,cast,consists,grains,compounds,mostly,located,boundaries,Extruded,higher,temperatures,showed,coarser,microstructures,whereas,those,extruded,ratios,contained,finer,ones,although,more,dynamic,lower,intermetallics,measured,both,conditions,Combined,provided,compressive,strengths,However,significant,improvement,was,achieved,could,decrease,rate,simulated,body,fluid,over,due,primarily,refined,pronounced,resistance,compared
AB值:
0.496074
相似文献
Tailoring precipitation/properties and related mechanisms for a high-strength aluminum alloy plate via low-temperature retrogression and re-aging processes
L.G.Hou;H.Yu;Y.W.Wang;L.You;Z.B.He;C.M.Wu;D.G.Eskin;L.Katgerman;L.Z.Zhuang;J.S.Zhang-State Key Laboratory for Advanced Metals&Materials,University of Science&Technology Beijing,Beijing 100083,China;BCAST,Brunel University London,Kingston Lane,Uxbidge Middlesex UB8 3PH,United Kingdom;Nanjing Advanced Transportation Equipment New Technology Research Institute,Nanjing 211800,China;Institute of mineral resources,Chinese Academy of Geological Sciences,Beijing 100037,China;Tomsk State University,Tomsk,634050,Russian Federation;Katgerman Aluminium Technology,van Beuningenlaan 10,2334CC Leiden,NetherlandsDepartment of Materials Science and Engineering,Delft University of Technology,Mekelweg 2,2628CD Delft,the Netherlands
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。