典型文献
                Recovery of titanium, aluminum, magnesium and separating silicon from titanium-bearing blast furnace slag by sulfuric acid curing–leaching
            文献摘要:
                    An energy-efficient route was adopted to treat titanium-bearing blast furnace slag (TBBFS) in this study. Titanium, aluminum, and magnesium were simultaneously extracted and silicon was separated by low temperature sulfuric acid curing and low concentration sulfuric acid leaching. The process parameters of sulfuric acid curing TBBFS were systematically studied. Under the optimal conditions, the recovery of titanium, aluminum, and magnesium reached 85.96%, 81.17%, and 93.82%, respectively. The rapid leaching model was used to limit the dissolution and polymerization of silicon, and the dissolution of silicon was only 3.18%. The mechanism of sulfuric acid curing–leaching was investigated. During the curing process, the reaction occurred rapidly and released heat massively. Under the attack of hydrogen ions, the struc-ture of TBBFS was destroyed, silicate was depolymerized to form filterable silica, and titanium, magnesium, aluminum, and calcium ions were replaced to form sulfates and enriched on the surface of silica particles. Titanium, aluminum, and magnesium were recovered in the leaching solution, and calcium sulfate and silica were enriched in the residue after leaching. This method could effectively avoid the formation of silica sol during the leaching process and accelerate the solid–liquid separation.
                文献关键词:
                    
                中图分类号:
                    作者姓名:
                    
                        Long Wang;Liang Chen;Weizao Liu;Guoquan Zhang;Shengwei Tang;Hairong Yue;Bin Liang;Dongmei Luo
                    
                作者机构:
                    College of Chemical Engineering,Sichuan University,Chengdu 610065,China;College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China
                文献出处:
                    
                引用格式:
                    
                        [1]Long Wang;Liang Chen;Weizao Liu;Guoquan Zhang;Shengwei Tang;Hairong Yue;Bin Liang;Dongmei Luo-.Recovery of titanium, aluminum, magnesium and separating silicon from titanium-bearing blast furnace slag by sulfuric acid curing–leaching)[J].矿物冶金与材料学报,2022(09):1705-1714
                    
                A类:
                TBBFS
                B类:
                    Recovery,titanium,aluminum,magnesium,separating,silicon,from,bearing,blast,furnace,slag,by,sulfuric,acid,curing,leaching,An,energy,efficient,route,was,adopted,treat,this,study,Titanium,were,simultaneously,extracted,separated,low,temperature,concentration,process,parameters,systematically,studied,Under,optimal,conditions,recovery,reached,respectively,model,used,limit,dissolution,polymerization,only,mechanism,investigated,During,reaction,occurred,rapidly,released,heat,massively,attack,hydrogen,struc,destroyed,silicate,depolymerized,filterable,calcium,replaced,sulfates,enriched,surface,particles,recovered,residue,after,This,method,could,effectively,avoid,formation,during,accelerate,solid,liquid,separation
                AB值:
                    0.456816
                相似文献
                
            机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。