FAILED
首站-论文投稿智能助手
典型文献
Microstructure and Mechanical Properties of Ti-Ta Composites Prepared Through Cold Spray Additive Manufacturing
文献摘要:
In this study,an innovative approach was used to fabricate Ti-Ta composite biomaterials through cold spray additive manu-facturing followed by a diffusion treatment.The microstructure and mechanical properties of the composites were investigated in detail using field emission scanning electron microscopy,electron backscatter diffraction,3D X-ray computed tomogra-phy,tensile test,nanohardness test and resonance vibration test.The obtained results indicated that the prepared composites have inhomogeneity in their microstructure and composition.A unique microstructure,composed of Ti-rich,Ta-rich and diffusion regions,was evolved in the composites due to incomplete diffusion between Ti and Ta splats.Further,Kirkendall pores were formed in the composites due to uneven diffusion of the two phases(of Ti and Ta)during high-temperature heat treatment.The prepared composites simultaneously showed low elastic modulus and high tensile strength which is required for a good biomaterial.Low elastic modulus was associated with the residual pores and the alloying effect of Ta in Ti,while high tensile strength was related to the solid solution strengthening effects.The obtained results indicated that the prepared Ti-Ta composites have a great potential to become a new candidate for biomedical applications.
文献关键词:
作者姓名:
Junrong Tang;Naeem ul Haq Tariq;Zhipo Zhao;Mingxiao Guo;Hanhui Liu;Yupeng Ren;Xinyu Cui;Yanfang Shen;Jiqiang Wang;Tianying Xiong
作者机构:
Shi-changxu Innovation Center for Advanced Materials,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,China;Department of Metallurgy and Materials Engineering,Pakistan Institute of Engineering and Applied Sciences,Nilore,Islamabad,Pakistan
引用格式:
[1]Junrong Tang;Naeem ul Haq Tariq;Zhipo Zhao;Mingxiao Guo;Hanhui Liu;Yupeng Ren;Xinyu Cui;Yanfang Shen;Jiqiang Wang;Tianying Xiong-.Microstructure and Mechanical Properties of Ti-Ta Composites Prepared Through Cold Spray Additive Manufacturing)[J].金属学报(英文版),2022(09):1465-1476
A类:
tomogra,nanohardness,splats
B类:
Microstructure,Mechanical,Properties,Ti,Ta,Composites,Prepared,Through,Cold,Spray,Additive,Manufacturing,In,this,study,innovative,approach,was,used,fabricate,biomaterials,through,cold,spray,additive,manu,followed,by,diffusion,treatment,microstructure,mechanical,properties,composites,were,investigated,detail,using,field,emission,scanning,electron,microscopy,backscatter,diffraction,computed,phy,tensile,test,resonance,vibration,obtained,results,indicated,that,prepared,have,inhomogeneity,their,composition,unique,composed,rich,regions,evolved,due,incomplete,between,Further,Kirkendall,pores,formed,uneven,two,phases,during,high,temperature,heat,simultaneously,showed,elastic,modulus,which,required,good,Low,associated,residual,alloying,while,related,solid,solution,strengthening,effects,great,potential,become,new,candidate,biomedical,applications
AB值:
0.571681
相似文献
Performance Evaluation of Calcium Alkali-treated Oil Palm/Pineapple Fibre/Bio-phenolic Composites
Sameer A.Awad;Hassan Fouad;Eman M.Khalaf;N.Saba;Hom N.Dhakal;M.Jawaid;Othman Y.Alothman-Department of Chemistry,School of Science and Technology,University of New England,Armidale,NSW 2351,Australia;Department of Chemistry,College of Education for Pure Science,University of Al-Anbar,Ramadi 31001,Iraq;Biomedical Engineering Department,Faculty of Engineering,Helwan University,Helwan 11792,Egypt;Pharmacy Department,Al-Maarif University College,Anbar 3001 Ramadi,Iraq;Laboratory of Biocomposite Technology,Institute of Tropical Forestry and Forest Products(INTROP),Universiti Putra Malaysia,43400 Serdang,Malaysia;Advanced Polymers and Composites(APC)Research Group,School of Mechanical and Design Engineering,University of Portsmouth,Portsmouth P 3DJ,UK;Department of Chemical Engineering,College of Engineering,King Saud University,Riyadh 11433,Saudi Arabia
Microstructure evolution and deformation mechanism of α+β dual-phase Ti-xNb-yTa-2Zr alloys with high performance
Ting Zhang;Daixiu Wei;Eryi Lu;Wen Wang;Kuaishe Wang;Xiaoqing Li;Lai-Chang Zhang;Hidemi Kato;Weijie Lu;Liqiang Wang-State Key Laboratory of Metal Matrix Composites,School of Material Science and Engineering,Shanghai Jiao Tong University,Shanghai,200240,China;School of Metallurgical Engineering,Xi'an University of Architecture and Technology,Xi'an,710055,China;Institute for Materials Research,Tohoku University,2-1-1 Katahira,Sendai,Miyagi,980-8577,Japan;Department of Stomatology,Renji Hospital,School of Medicine,Shanghai Jiao Tong University,Shanghai,200127,China;Department of Materials Science and Engineering,KTH-Royal Institute of Technology,10044,Stockholm,Sweden;School of Engineering,Edith Cowan University,270 Joondalup Drive,Joondalup,Perth,WA 6027,Australia
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。