首站-论文投稿智能助手
典型文献
Optimization of Quenching Process for ZTAP/High Chromium Cast Iron Composites
文献摘要:
In order to solve the problem of cracking of ZTAP (Zirconia toughened alumina ceramic particles) reinforced HCCI (high chromium cast iron) matrix composites, the quenching process was optimized. ZTAP reinforced HCCI matrix composites were prepared by infiltration method with gravity sand casting. The thermal expansion curves of HCCI and the composites were measured at different cooling rates by Glebble-3500. The microstructure of the HCCI matrix and the composites were characterized by X-ray diffraction, light microscopy, SEM, ESD, and EPMA. The tested mechanical properties include Rockwell hardness and impact toughness. The deformation differences of HCCI and the composite at different cooling rates were obtained according to the test results of thermal expansion coefficient curve and changes in microstructure and mechanical properties, and air cooling was the most favorable for the composites to have good hardness and not easy to crack. The cooling rate during air cooling is approximately equal to 21 ℃/s in this work. When the quenching process was air cooling, the impact toughness and hardness of the composites are 3.7 J/cm2 and 61.8 HRC, respectively, and the deformation difference between the composites and HCCI was 20 μm at 300 ℃.
文献关键词:
作者姓名:
WEI Hongming;JIANG Yehua;ZHANG Xiaozu;JIA Yuanwei;ZHOU Mojin;XUE Da
作者机构:
Faculty of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,China;State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China
引用格式:
[1]WEI Hongming;JIANG Yehua;ZHANG Xiaozu;JIA Yuanwei;ZHOU Mojin;XUE Da-.Optimization of Quenching Process for ZTAP/High Chromium Cast Iron Composites)[J].武汉理工大学学报(材料科学版)(英文版),2022(06):1137-1142
A类:
ZTAP,Glebble
B类:
Optimization,Quenching,Process,High,Chromium,Cast,Iron,Composites,In,order,solve,problem,cracking,Zirconia,toughened,alumina,ceramic,particles,reinforced,HCCI,high,chromium,iron,matrix,composites,quenching,process,was,optimized,were,prepared,by,infiltration,method,gravity,sand,casting,thermal,expansion,curves,measured,different,cooling,rates,microstructure,characterized,ray,diffraction,light,microscopy,ESD,EPMA,tested,mechanical,properties,include,Rockwell,hardness,impact,toughness,deformation,differences,obtained,according,results,coefficient,changes,air,most,favorable,have,good,not,easy,during,approximately,equal,this,work,When,HRC,respectively,between
AB值:
0.496844
相似文献
pH-indicative Films Based on Chitosan-PVA/Sepiolite and Anthocyanin from Red Cabbage:Application in Milk Packaging
Marya Raji;Laila El Foujji;Mohamed El Mehdi Mekhzoum;Mounir El Achaby;Hamid Essabir;Rachid Bouhfid;Abou el kacem Qaiss-Moroccan Foundation for Advanced Science,Innovation and Research,Composites and Nanocomposites Center,Rabat Design Center,Rue Mohamed El Jazouli,Madinat El Irfane,Rabat 10100,Morocco;Faculty of Science,Laboratoire de Chimie Organique Et Hétérocyclique,University Mohammed V in Rabat,Rabat 10100,Morocco;Materials Science and Nano-Engineering Department,Mohammed VI Polytechnic University,Lot 660-Hay Moulay Rachid,Ben Guerir 43150,Morocco;Mechanic,Materials,and Composites(MMC),Laboratory of Energy Engineering,Materials and Systems,National School of Applied Sciences of Agadir,Ibn Zohr University,Agadir 80000,Morocco
Effect of Filler Content on Flexural and Viscoelastic Properties of Coir Fibers and Argania Nut-shells Reinforced Phenolic Resin Composites
Hala Bensalah;Marya Raji;Kamal Gueraoui;Abdelazziz Khtira;Hamid Essabir;Rachid Bouhfid;Abou el kacem Qaiss-Group of Mechanics and Materials,Energy Research Center,Faculty of Science,Mohammed V University in Rabat,10100 Rabat,Morocco;Composites and Nanocomposites Center,Moroccan Foundation for Advanced Science,Innovation and Research(MAScIR),10100 Rabat,Morocco;Mohammed Ⅵ Polytechnic University,Lot 660 Hay Moulay Rachid,43150 Ben Guerir,Morocco;Group of Simulation in Mechanics and Energy,Energy Research Center,Faculty of Science,Mohammed ⅤUniversity,10100 Rabat,Morocco;Group of Semiconductors and Environmental Sensor Technologies,Energy Research Center,Faculty of Science,Mohammed V University,10100 Rabat,Morocco;Mechanic Materials and Composites(MMC),Laboratory of Energy Engineering,Materials and Systems,National School of Applied Sciences of Agadir,Ibn Zohr University,80000 Agadir,Morocco
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。