首站-论文投稿智能助手
典型文献
Effect of spark plasma sintering and reinforcements on the formation of ultra-fine and nanograins in AA2024-TiB2-Y hybrid composites
文献摘要:
This study reports the influence of sintering mechanism and reinforcement materials on the formation of ultra-fine and nanograins in Al-TiB2-Y nanohybrid composites.The mechanical properties of the composites and their corresponding micro and nanostructures are correlated.The experimental and characterization results revealed that despite the addition of TiB2,the hard and brittle Al3Ti phase formation in the composites was suppressed and hence,their ductility was retained.It was found that yttrium content of 0.3 wt%was the optimum amount which created advantageous spark plasma sintering conditions,and the addition of 0.3 wt%promoted the formation of bi-modal size grains(ultra-fine and nano)along with micro grains,Ω and other nano precipitates,resulting in a significant enhancement in the composite properties.The formation of ultra-fine and nanograins may be attrib-uted to the combined effect of melting and rapid solidification at necking zones due to Joule's heating and thermo-mechanical fatigue.Among all the sintered composites,the highest hardness(137 HV),ultimate tensile strength(UTS)(496 MPa),yield strength(YS)(438 MPa)with 15.7%elongation were obtained in the sintered sample reinforced with 1.0 wt%TiB2 and 0.3 wt%yttrium.
文献关键词:
作者姓名:
CH.Suresh Vidyasagar;D.B.Karunakar
作者机构:
Department of Architecture and Planning,Indian Institute of Technology Roorkee,247667,India;Mechanical and Industrial Engineering Department,Indian Institute of Technology Roorkee,247667,India
引用格式:
[1]CH.Suresh Vidyasagar;D.B.Karunakar-.Effect of spark plasma sintering and reinforcements on the formation of ultra-fine and nanograins in AA2024-TiB2-Y hybrid composites)[J].自然科学进展·国际材料(英文),2022(01):79-86
A类:
B类:
Effect,spark,plasma,sintering,reinforcements,formation,ultra,fine,nanograins,AA2024,TiB2,composites,This,study,reports,influence,mechanism,materials,nanohybrid,mechanical,properties,their,corresponding,micro,nanostructures,are,correlated,experimental,characterization,results,revealed,that,despite,addition,brittle,Al3Ti,phase,was,suppressed,hence,ductility,retained,It,found,yttrium,content,wt,optimum,amount,which,created,advantageous,conditions,promoted,modal,size,along,other,precipitates,resulting,significant,enhancement,may,be,attrib,uted,combined,effect,melting,rapid,solidification,necking,zones,due,Joule,heating,thermo,fatigue,Among,all,sintered,highest,hardness,HV,ultimate,tensile,strength,UTS,yield,YS,elongation,were,obtained,sample,reinforced
AB值:
0.569974
相似文献
Effect of molybdenum on interfacial properties of titanium carbide reinforced Fe composite
Seungchan Cho;Junghwan Kim;Ilguk Jo;Jae Hyun Park;Jaekwang Lee;Hyun-Uk Hong;Bong Ho Lee;Wook Ryol Hwang;Dong-Woo Suh;Sang-Kwan Lee;Sang-Bok Lee-Composites Research Division,Korea Institute of Materials Science(KIMS),Changwon 51508,South Korea;Advanced Materials Engineering,Dong-Eui University,Busan 47340,South Korea;Department of Aerospace and Software Engineering,Gyeongsang National University,Jinju 52828,South Korea;Department of Physics,Pusan National University,Busan 46241,South Korea;Department of Materials Convergence and System Engineering,Changwon National University,Changwon 51140,South Korea;Center for Core Research Facilities,Daegu Gyeongbuk Institute of Science and Technology,Daegu 42988,South Korea;School of Mechanical Engineering,Gyeongsang National University,Jinju 52828,South Korea;Graduate Institute of Ferrous Technology,Pohang University of Science and Technology,Gyeongbuk 37673,South Korea
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。