FAILED
首站-论文投稿智能助手
典型文献
In situ polymerization preparation and mechanical properties of nanocomposites based on PA10T/10I-block-PEG copolymer and graphene oxide
文献摘要:
Poly (decamethylene terephthalamide/decamethylene isophthalamide)-block-polyvinyl alcoho) (PA10T/10I-PEG) copolymer/graphene oxide (GO) composites were prepared via in-situ melt polymerization and two different nano-filler addition approaches were compared. The relationship between the micro-structure and performance of the elastomer composites prepared by one-step and two-step methods was explored. The results show that the two-step method significantly promoted the dispersion of the GO in a polymer matrix, and facil-itated the grafting of more hard molecular chains. Thus, the elastic modulus and tensile strength of the nano-composite have been significantly improved by the presence of GO. This was because of the strong interaction between the functional groups on the surface of the GO and the hard molecular chains. This would be also be favorable to load transfer across the interface. Additionally, the elongation at the break of composites increased by 10%with the addition of a small amount of GO (0.2%wt). This is because hard domains tend to be enriched on the surface of GO in composites and act as a lubricating layer at the interface between the GO and matrix, leading to increased deformation ability. This work provides an effective strategy to prepare elastomer composites with high strength and toughness.
文献关键词:
作者姓名:
Xiao-bo Fu;Xin Tong;Jia-cao Yang;Gang Zhang;Mei-lin Zhang;Xiao-jun Wang;Jie Yang
作者机构:
College of Polymer Science and Engineering, Sichuan University, Chengdu, 610065, China;Analytical and Testing Center, Sichuan University, Chengdu, 610064, China;Jiangsu JITRI Advanced Polymer Materials Research Institute Co., Ltd, China;State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, 610065, China
引用格式:
[1]Xiao-bo Fu;Xin Tong;Jia-cao Yang;Gang Zhang;Mei-lin Zhang;Xiao-jun Wang;Jie Yang-.In situ polymerization preparation and mechanical properties of nanocomposites based on PA10T/10I-block-PEG copolymer and graphene oxide)[J].纳米材料科学(英文版),2022(03):276-284
A类:
PA10T,10I,decamethylene,terephthalamide,isophthalamide,alcoho,itated
B类:
In,situ,polymerization,preparation,mechanical,properties,nanocomposites,block,PEG,copolymer,graphene,oxide,Poly,polyvinyl,were,prepared,via,melt,two,different,filler,addition,approaches,compared,relationship,between,micro,structure,performance,elastomer,by,one,step,methods,was,explored,results,show,that,significantly,promoted,dispersion,matrix,facil,grafting,more,hard,molecular,chains,Thus,elastic,modulus,tensile,strength,have,been,improved,presence,This,because,strong,interaction,functional,groups,surface,would,also,favorable,load,transfer,across,interface,Additionally,elongation,break,increased,small,amount,wt,domains,tend,enriched,lubricating,layer,leading,deformation,ability,work,provides,effective,strategy,high,toughness
AB值:
0.470921
相似文献
Boosting fire safety and mechanical performance of thermoplastic polyurethane by the face-to-face two-dimensional phosphorene/MXene architecture
Yong Luo;Yuhui Xie;Wei Geng;Junhan Chu;Hua Wu;Delong Xie;Xinxin Sheng;Yi Mei-Yunnan Provincial Key Laboratory of Energy Saving in Phosphorus Chemical Engineering and New Phosphorus Materials,The Higher Educational Key Laboratory for Phosphorus Chemical Engineering of Yunnan Province,Faculty of Chemical Engineering,Kunming University of Science and Technology,Kunming 650500,China;Department of Chemistry and Applied Biosciences,Institute for Chemical and Bioengineering,ETH Zurich,Zurich 8093,Switzerland;Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter,School of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。