首站-论文投稿智能助手
典型文献
Spherical modification of tungsten powder by particle composite system
文献摘要:
Owing to contradiction between increasing demand of spherical tungsten powder and limitation of traditional manufacturing technology,a novel preparation method was developed to sphericize the polygonal tungsten powder by means of modification of particle composite system.Tungsten powder particles were modified by par-ticle composite system,and detailed characterization by scanning electron microscopy(SEM)was studied.Particle size distribution and function mechanism were analyzed,and the internal relationship between average diameter and processing time was discussed.The results show that the spherical tungsten powder with an average diameter of 6.41 μm is obtained from polyhedral tungsten powder with an average diameter of 7.50 μm.The spherical effect could be achieved(sharp edge angles of particles are rounded off and reshaped)when the processing time is over 30 min.The relationship between average diameter(d)and pro-cessing time can be described by the exponential decay model,which provides a good interpretation for the process of modification.The relationship between them can be expressed by the equation d=1.87406exp(-x/8.92718)+6.4182.The proposed method could readily enable large-scale production of spherical tungsten powder.
文献关键词:
作者姓名:
Cong-Cong Wang;Cheng-Chang Jia;Peng Gao;Guo-Sheng Gai;Yu-Fen Yang
作者机构:
School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Powder Technology R&D Group,Department of Material Science and Engineering,Tsinghua University,Beijing 100084,China
引用格式:
[1]Cong-Cong Wang;Cheng-Chang Jia;Peng Gao;Guo-Sheng Gai;Yu-Fen Yang-.Spherical modification of tungsten powder by particle composite system)[J].稀有金属(英文版),2022(06):1972-1976
A类:
sphericize,87406exp
B类:
Spherical,modification,tungsten,powder,by,composite,system,Owing,contradiction,between,increasing,demand,spherical,limitation,traditional,manufacturing,technology,novel,preparation,method,was,developed,polygonal,means,Tungsten,particles,were,modified,detailed,characterization,scanning,electron,microscopy,studied,Particle,size,distribution,function,mechanism,analyzed,internal,relationship,average,diameter,processing,discussed,results,show,that,obtained,from,polyhedral,effect,could,achieved,sharp,edge,angles,are,rounded,off,reshaped,when,over,described,exponential,decay,model,which,provides,good,interpretation,them,expressed,equation,+6,proposed,readily,enable,large,scale,production
AB值:
0.50864
相似文献
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。