典型文献
Microstructure and mechanical properties of friction pull plug welding for 2219-T87 aluminum alloy with tungsten inert gas weld
文献摘要：
The friction pull plug welding (FPPW) of the 2219-T87 tungsten inert gas (TIG) welded joint was investigated, and the microstruc-tures, precipitate evolution, mechanical properties, and fracture morphologies of this joint were analyzed and discussed. In this study, defect-free joints were obtained using a rotational speed of 7000 r/min, an axial feeding displacement of 12 mm, and an axial force of 20–22 kN. The results indicated that within these welding parameters, metallurgical bonding between the plug and plate is achieved by the formation of recrys-tallized grains. The microstructural features of the FPPW joint can be divided into different regions, including the heat-affected zone (HAZ), thermomechanically affected zone (TMAZ), recrystallization zone (RZ), heat-affected zone in the TIG weld (TIG-HAZ), and the thermomech-anically affected zone in the TIG weld (TIG-TMAZ). In the TIG-TMAZ, the grains were highly deformed and elongated due to the shear and the extrusion that produces the plug during the FPPW process. The main reason for the softening in the TMAZ is determined to be the dissolu-tion of θ' and coarsening of θ precipitate particles. In a tensile test, the FPPW joint welded with an axial force of 22 kN showed the highest ulti-mate tensile strength of 237 MPa. The locations of cracks and factures in the TIG-TMAZ were identified. The fracture morphology of the tensile sample showed good plasticity and toughness of the joints.
文献关键词：
中图分类号：
作者姓名：
Zhen Shao;Lei Cui;Lijun Yang;Peng Lu;Huimiao Wang;Zhuanping Sun;Jianling Song
作者机构：
Tianjin Key Laboratory of Advanced Joining Technology,School of Materials Science and Engineering,Tianjin University,Tianjin 300350,China;Tianjin Space Launch Vehicle Manufacturing Co.Ltd,Tianjin 300457,China
文献出处：
引用格式：
[1]Zhen Shao;Lei Cui;Lijun Yang;Peng Lu;Huimiao Wang;Zhuanping Sun;Jianling Song-.Microstructure and mechanical properties of friction pull plug welding for 2219-T87 aluminum alloy with tungsten inert gas weld)[J].矿物冶金与材料学报,2022(06):1216-1224
A类：
FPPW,thermomechanically,thermomech,anically,factures
B类：
Microstructure,properties,friction,pull,plug,welding,T87,aluminum,alloy,tungsten,inert,gas,TIG,welded,was,investigated,precipitate,evolution,fracture,morphologies,this,were,analyzed,discussed,In,study,defect,free,joints,obtained,using,rotational,speed,axial,feeding,displacement,force,kN,results,indicated,that,within,these,parameters,metallurgical,bonding,between,plate,achieved,by,formation,tallized,grains,microstructural,features,can,divided,into,different,regions,including,heat,affected,zone,HAZ,TMAZ,recrystallization,RZ,highly,deformed,elongated,due,shear,extrusion,produces,during,process,main,reason,softening,determined,dissolu,coarsening,particles,tensile,test,showed,highest,ulti,mate,strength,locations,cracks,identified,morphology,sample,good,plasticity,toughness
AB值：
0.461012
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
