首站-论文投稿智能助手
典型文献
An Al-12Si/ZnS powder inoculant for eutectic silicon in Al-12Si alloy
文献摘要:
To obtain high-performance Al-Si-based cast alloys, refinement and modification of Si phases are required. An Al-12Si/ZnS powder inoculant was designed and fabricated using a chemical bath deposition method. The efficiency of the inoculant for modifying the eutectic Si phase in as-cast Al-12Si alloy was studied. Results show that Al-12Si/ZnS powder can significantly refine the eutectic Si in Al-Si cast alloys. The best refinement effect for eutectic Si is achieved with 17.5wt.% Al-12Si/ZnS powder. Coarse long needle-shaped eutectic Si with a length of 18 μm was modified into approximately spherical shape with a diameter of 6.53 μm, which is evenly distributed throughout the alloy. The E2EM model calculation indicates that the inter-plane misfit (Fp) and inter-atomic spacing misfit (Fr) between ZnS and Si are all less than 0.5%, which confirms that ZnS is a potential nucleation site for Si phase. The hardness, tensile strength, and elongation of Al-12Si alloys modified with 17.5% Al-12Si/ZnS powder increase 6.30%, 16.18% and 55.45%, respectively, compared to the unmodified Al-12Si alloy. The fracture behavior of the alloy with 17.5wt.% Al-12Si/ZnS powder is dominated by transgranular fracture supplemented by intergranular fracture.
文献关键词:
作者姓名:
Ying Wang;Pan-yu Chen;Yu-hui Lin;Mei Zhao;Cheng-dong Li
作者机构:
College of Materials Science and Engineering,Qingdao University of Science&Technology,Qingdao 266042,China
文献出处:
引用格式:
[1]Ying Wang;Pan-yu Chen;Yu-hui Lin;Mei Zhao;Cheng-dong Li-.An Al-12Si/ZnS powder inoculant for eutectic silicon in Al-12Si alloy)[J].中国铸造,2022(02):149-157
A类:
B类:
An,12Si,ZnS,powder,inoculant,eutectic,silicon,To,obtain,high,performance,cast,alloys,refinement,modification,phases,required,was,designed,fabricated,using,chemical,bath,deposition,method,efficiency,modifying,studied,Results,show,that,significantly,best,effect,achieved,5wt,Coarse,needle,shaped,length,into,approximately,spherical,diameter,which,evenly,distributed,throughout,E2EM,model,calculation,indicates,plane,misfit,Fp,atomic,spacing,Fr,between,less,than,confirms,potential,nucleation,site,hardness,tensile,strength,elongation,increase,respectively,compared,unmodified,fracture,behavior,dominated,by,transgranular,supplemented,intergranular
AB值:
0.442351
相似文献
Origin of non-uniform plasticity in a high-strength Al-Mn-Sc based alloy produced by laser powder bed fusion
Dina Bayoumy;Kwangsik Kwak;Torben Boll;Stefan Dietrich;Daniel Schliephake;Jie Huang;Junlan Yi;Kazuki Takashima;Xinhua Wu;Yuman Zhu;Aijun Huang-Monash Centre for Additive Manufacturing,15-17 Normanby Rd,Notting Hill,VIC 3168,Australia;Department of Materials Science and Engineering,Monash University,Clayton,VIC 3800,Australia;Department of Materials Science and Engineering,Kumamoto University,2-39-1 Kurokami,Chuo-ku,Kumamoto 860-8555,Japan;Karlsruhe Nano Micro Facility(KNMF),Karlsruhe Institute of Technology(KIT),Hermann-von-Helmholtz-Platz 1,76344,Eggenstein-Leopoldshafen,Germany;Institute for Applied Materials(IAM-WK),Karlsruhe Institute of Technology(KIT),Engelbert-Arnold-Stra?e 4,76131 Karlsruhe,Germany;Aeronautical Manufacturing Technology Institute,Shanghai Aircraft Manufacturing Co.,Ltd.,Shanghai 201324,China
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。