FAILED
首站-论文投稿智能助手
典型文献
Improvement of microstructure, mechanical properties, and corrosion resistance of WE43 alloy by squeeze casting
文献摘要:
The WE43 magnesium alloy was prepared by squeeze casting, and the influence of squeeze casting parameters on mechanical properties and corrosion resistance was studied and compared with gravity casting. The gravity cast WE43 alloy shows uneven grain size distribution, and some grains even greater than 90 μm. While, the grain size of the squeeze cast WE43 alloy is mainly distributed in 20-50 μm. The Mg12Nd2Y phase morphology changes from large lamellar to strips after squeeze casting, whereas Mg24Y5 phase exhibits no obvious change. The yield strength, tensile strength, and elongation of the gravity cast WE43 alloy are 127 MPa, 157 MPa, and 6%, respectively, and 145 MPa, 193 MPa, and 9.1% for squeeze cast alloy. For the squeeze cast WE43 alloy, the average corrosion rate is 0.6056 mm·year-1 according to immersion test results, and according to electrochemical measurements, the corrosion current density is 78.13 μA·cm-2, which is better than that of the gravity cast WE43 alloy. Compared with gravity casting, the grains and second phase of the WE43 alloy by squeeze casting are refined, and the mechanical properties and corrosion resistance are improved. This may expand the applications of the WE43 alloy.
文献关键词:
作者姓名:
Jian-cong Bian;Bao-yi Yu;Jian-fei Hao;Hui-wen Zhu;Hui-shu Wu;Bin Chen;Wei-rong Li;Yan-fang Li;Li Zheng;Run-xia Li
作者机构:
School of Materials Science and Engineering,Shenyang University of Technology,Shenyang 110870,China;School of Materials Science and Engineering,Dongguan University of Technology,Dongguan 523808,Guangdong,China;Dongguan Eontec Co.,Ltd.,Dongguan 523808,Guangdong,China
文献出处:
引用格式:
[1]Jian-cong Bian;Bao-yi Yu;Jian-fei Hao;Hui-wen Zhu;Hui-shu Wu;Bin Chen;Wei-rong Li;Yan-fang Li;Li Zheng;Run-xia Li-.Improvement of microstructure, mechanical properties, and corrosion resistance of WE43 alloy by squeeze casting)[J].中国铸造,2022(05):419-426
A类:
Mg12Nd2Y
B类:
Improvement,microstructure,mechanical,properties,corrosion,resistance,WE43,alloy,by,squeeze,casting,magnesium,was,prepared,influence,parameters,studied,compared,gravity,shows,uneven,size,distribution,some,grains,greater,than,While,mainly,distributed,phase,morphology,changes,from,large,lamellar,strips,after,whereas,Mg24Y5,exhibits,no,obvious,yield,strength,tensile,elongation,respectively,For,average,rate,year,according,immersion,test,results,electrochemical,measurements,current,density,which,better,that,Compared,second,refined,improved,This,may,expand,applications
AB值:
0.394648
相似文献
Influence of Zr and Mn additions on microstructure and properties of Mg–2.5wt%Cu–Xwt%Zn (X = 2.5, 5 and 6.5) alloys
A.V.Koltygin;V.E.Bazhenov;I.V.Plisetskaya;V.A.Bautin;A.I.Bazlov;N.Y.Tabachkova;O.O.Voropaeva;A.A.Komissarov;V.D.Belov-Foundry Department,National University of Science and Technology(MISiS),Moscow 119049,Russia;Department of Metallurgy Steel,New Production Technologies and Protection of Metals,National University of Science and Technology(MISiS),Moscow119049,Russia;Laboratory of Advanced Green Materials,National University of Science and Technology(MISiS),Moscow 119049,Russia;Department of Materials Science of Semiconductors and Dielectrics,National University of Science and Technology(MISiS),Moscow 119049,Russia;Fianit Laboratory(Laser Materials and Technology Research Center at GPI),Prokhorov General Physics Institute RAS,Moscow 119991,Russia;Laboratory of Hybrid Nanostructured Materials,National University of Science and Technology(MISiS),Moscow 119049,Russia;Laboratory of Medical Bioresorption and Bioresistance,Moscow State University of Medicine and Dentistry,Moscow 127473,Russia
Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy
Wanting Sun;Bo Wu;Hui Fu;Xu-Sheng Yang;Xiaoguang Qiao;Mingyi Zheng;Yang He;Jian Lu;San-Qiang Shi-State Key Laboratory of Ultra-precision Machining Technology,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen,China;School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;Centre for Composite Materials and Structures,Harbin Institute of Technology,Harbin 150080,China;Department of Mechanical Engineering,City University of Hong Kong,Kowloon,Hong Kong,China;Department of Mechanical Engineering,The Hong Kong Polytechnic University,Hung Hom,Hong Kong,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。