典型文献
Anisotropy study of the microstructure and properties of AlCoCrFeNi2.1 eutectic high entropy alloy additively manufactured by selective laser melting
文献摘要：
The AlCoCrFeNi2.1 eutectic high-entropy alloy(EHEA)was prepared by selective laser melting(SLM),fo-cusing on the anisotropy of microstructure and mechanical performance.The AlCoCrFeNi2.1 EHEA printed by SLM has face-centered cubic(FCC)and body-centered cubic(BCC)/B2 phases,and the FCC phase accu-mulates at the boundary of the molten pool.With the increase in volumetric energy density(VED),the content of the FCC phase parallel to the surface in the direction of the building increases from 30.9％to 41％.The X-Z plane mainly produces columnar crystals along the temperature gradient,while a large number of equiaxed crystals are produced in the X-Y direction.When the volume energy density is 157 kJ/mol(VED 157),the average grain size is 1.33 μm for BCC and 1.14 μm for FCC,which is signif-icantly smaller than other preparation methods.Due to defect distribution and size,the microhardness of the X-Y plane is generally higher than that of the X-Z plane,with maximum hardnesses of 660 HV and 655 HV,respectively,which is much higher than those of traditionally manufactured counterparts.The compression performance of SLM process AlCoCrFeNi2.1 EHEAs shows maximum yield strength of 1567 MPa,and the ultimate compressive strength can reach 3276 MPa.
文献关键词：
中图分类号：
作者姓名：
Liwei Lan;Wenxian Wang;Zeqin Cui;Xiaohu Hao;Dong Qiu
作者机构：
College of Materials Science and Engineering,Taiyuan University of Technology,Taiyuan 030024,China;Key Laboratory of Interface Science and Engineering in Advanced Materials,Taiyuan University of Technology,Ministry of Education,Taiyuan 030024,China;Shanxi-Zhejiang University New Materials and Chemical Research Institute,Taiyuan 030024,China;Centre for Additive Manufacturing,School of Engineering,RMIT University,Melbourne,Victoria 3001,Australia
文献出处：
引用格式：
[1]Liwei Lan;Wenxian Wang;Zeqin Cui;Xiaohu Hao;Dong Qiu-.Anisotropy study of the microstructure and properties of AlCoCrFeNi2.1 eutectic high entropy alloy additively manufactured by selective laser melting)[J].材料科学技术（英文版）,2022(34):228-239
A类：
cusing,mulates,hardnesses
B类：
Anisotropy,study,microstructure,properties,AlCoCrFeNi2,eutectic,entropy,alloy,additively,manufactured,by,selective,laser,melting,was,prepared,SLM,anisotropy,mechanical,performance,printed,centered,cubic,FCC,body,BCC,B2,phases,accu,boundary,molten,pool,With,volumetric,energy,density,VED,content,parallel,surface,direction,building,increases,from,plane,mainly,produces,columnar,crystals,along,temperature,gradient,while,large,number,equiaxed,produced,When,kJ,average,grain,size,which,signif,icantly,smaller,than,other,preparation,methods,Due,defect,distribution,microhardness,generally,higher,that,maximum,HV,respectively,much,those,traditionally,counterparts,compression,process,EHEAs,shows,yield,strength,ultimate,compressive,reach
AB值：
0.524509
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
