典型文献
Effects of mechanical vibration on the physical, metallurgical and mechanical properties of cast A308 (LM21) aluminum alloy
文献摘要：
This study investigated the microstructure, physical, and mechanical properties of die-cast A308 alloy subjected to mechanical vibration during solidification. Different frequencies (0, 20, 30, 40, and 50 Hz) at constant amplitude (31 μm) were employed using a power amplifier as the power input device. X-ray diffraction, optical microscopy, and scanning electron microscopy were used to examine the mor-phological changes in the cast samples under stationary and vibratory conditions. Metallurgical features of the castings were evaluated using ImageJ software. The average values of metallurgical features, including primary α-Al grain size, dendrite arm spacing, average area of eutect-ic silicon, aspect ratio, and percentage porosity, reduced by 34％, 59％, 56％, 22％, and 62％, respectively, at 30 Hz frequency compared with stationary casting. Mechanical tests of the cast samples showed that the yield strength (YS), ultimate tensile strength (UTS), percentage elonga-tion (％EL), and microhardness (HV) increased by 8％, 13％, 17％, and 16％, respectively, at 30 Hz frequency compared with stationary cast-ing. The fractured surface of the tensile specimens exhibited mixed-mode fracture behavior because of brittle facets, cleavage facets, ductile tearing, and dimple morphologies. The presence of small dimples showed that plastic deformation occurred before fracture.
文献关键词：
中图分类号：
作者姓名：
Siddharth Yadav;S.P.Tewari;J.K.Singh;S.C.Ram
作者机构：
Department of Mechanical Engineering,Indian Institute of Technology(BHU),Varanasi 221005,India;Department of Metallurgical Engineering,Indian Institute of Technology(BHU),Varanasi 221005,India
文献出处：
引用格式：
[1]Siddharth Yadav;S.P.Tewari;J.K.Singh;S.C.Ram-.Effects of mechanical vibration on the physical, metallurgical and mechanical properties of cast A308 (LM21) aluminum alloy)[J].矿物冶金与材料学报,2022(06):1206-1215
A类：
A308,LM21,Metallurgical,eutect
B类：
Effects,mechanical,vibration,physical,metallurgical,properties,aluminum,alloy,This,study,investigated,microstructure,die,subjected,during,solidification,Different,frequencies,constant,amplitude,were,employed,using,power,amplifier,input,device,ray,diffraction,optical,microscopy,scanning,electron,used,examine,phological,changes,samples,under,stationary,vibratory,conditions,features,castings,evaluated,ImageJ,software,average,values,including,primary,grain,size,dendrite,arm,spacing,area,silicon,aspect,percentage,porosity,reduced,by,respectively,frequency,compared,Mechanical,tests,showed,that,yield,strength,YS,ultimate,tensile,UTS,elonga,EL,microhardness,HV,increased,fractured,surface,specimens,exhibited,mixed,mode,behavior,because,brittle,facets,cleavage,ductile,tearing,morphologies,presence,small,dimples,plastic,deformation,occurred,before
AB值：
0.590184
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
