典型文献
Finite element simulation of real cavity closure in cast Ti6Al4V alloy during hot isostatic pressing
文献摘要：
The healing behavior of shrinkage cavity inside the cast Ti6Al4V alloy during hot isostatic pressing (HIP) was investigated experimentally by interrupted hot isostatic pressing tests. The X-ray micro computed tomography was used to record the morphology changes before and after hot isostatic pressing. The two-dimensional geometry obtained by the microCT scan was used in simulation to study the evolution of the real shrinkage cavity during hot isostatic pressing. Shrinkage cavities, shrinkage porosity and small gas pores can be effectively eliminated under proper HIP conditions. The two-dimensional morphology in the simulation results agrees well with the experimental results. This study reveals that plastic deformation, creep and diffusion are the main mechanisms of cavity closure during hot isostatic pressing. In addition, the simplified elliptical pores with aspect ratios at different positions were used to replace the real pores to further study the factors affecting the position of dimples after HIP by simulation. It is found that the position of the dimples mainly depends on the aspect ratio of the elliptical pore and the distance between the pore surface and the external surface of the geometric model.
文献关键词：
中图分类号：
作者姓名：
Qian Xu;Wen Li;Ya-jun Yin;Jian-xin Zhou;Hai Nan
作者机构：
State Key Laboratory of Materials Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China;AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China
文献出处：
引用格式：
[1]Qian Xu;Wen Li;Ya-jun Yin;Jian-xin Zhou;Hai Nan-.Finite element simulation of real cavity closure in cast Ti6Al4V alloy during hot isostatic pressing)[J].中国铸造,2022(01):55-62
A类：
B类：
Finite,element,simulation,real,cavity,closure,cast,Ti6Al4V,alloy,during,hot,isostatic,pressing,healing,behavior,shrinkage,inside,HIP,was,investigated,experimentally,by,interrupted,tests,ray,computed,tomography,used,record,morphology,changes,before,after,two,dimensional,geometry,obtained,microCT,scan,study,evolution,Shrinkage,cavities,porosity,small,gas,pores,effectively,eliminated,under,proper,conditions,results,agrees,well,This,reveals,that,plastic,deformation,creep,diffusion,are,mechanisms,In,addition,simplified,elliptical,aspect,ratios,different,positions,were,replace,further,factors,affecting,dimples,It,found,mainly,depends,distance,between,surface,external,geometric,model
AB值：
0.496508
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
