首站-论文投稿智能助手
典型文献
Thermal test and numerical simulation of cooling stave with internal ribbed tube
文献摘要:
A new type of cooling stave with internal ribbed tube was proposed,and the heat transfer performance of the stave was studied by means of thermal test and numerical simulation.The temperature of cooling stave was monitored in the conditions of furnace gas temperature of 200-700℃and cooling water velocity of 0.2-1.0 m/s.The thermal test results show that the internal rib structure can form swirl in the water pipe and improve the cooling capacity of the cooling stave.The higher the furnace temperature or the lower the cooling water flow rate,the more obvious the advantage of the cooling stave with internal ribbed tube.The mathematical model of the cooling stave with internal ribbed tube was established by FLUENT software,and the influence of the internal rib structure parameters on the heat transfer performance of the cooling stave was discussed.It is suggested that the parameters of the internal ribbed tube should be 4 ribs,1 mm in height,5-7 mm in width,and 20-30 mm in lead.In the same common working conditions of the cooling stave,the maximum temperature of the newly designed cooling stave with internal ribbed tube is reduced by 5.6%compared with that of common cooling stave with round tube.The water flow rate in the internal ribbed tube only needs 0.9 m/s to reach the cooling effect of 2 m/s in the common tube cooling stave,which can save 55%of water.In case of water shortage accident of cooling stave,the maximum temperature of the cooling stave with internal ribbed tube is decreased by 22.4%compared with that of common round tube,which can effectively reduce the harm of water shortage and protect the cooling stave.
文献关键词:
作者姓名:
Xun Xu;Li-jun Wu;Zhao-kuo Yuan
作者机构:
Xinglin College,Nantong University,Nantong 226000,Jiangsu,China;School of Mechanical Engineering,Tongji University,Shanghai 201804,China
引用格式:
[1]Xun Xu;Li-jun Wu;Zhao-kuo Yuan-.Thermal test and numerical simulation of cooling stave with internal ribbed tube)[J].钢铁研究学报(英文版),2022(08):1194-1204
A类:
stave
B类:
Thermal,test,numerical,simulation,cooling,internal,ribbed,tube,type,was,proposed,heat,transfer,performance,studied,by,means,thermal,temperature,monitored,conditions,furnace,gas,water,velocity,results,show,that,structure,can,swirl,pipe,improve,capacity,higher,lower,flow,rate,more,obvious,advantage,mathematical,model,established,FLUENT,software,influence,parameters,discussed,It,suggested,should,ribs,height,width,lead,In,same,common,working,maximum,newly,designed,reduced,compared,round,only,needs,reach,which,save,case,shortage,accident,decreased,effectively,harm,protect
AB值:
0.305399
相似文献
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant:From mechanisms to application
Xin CUI;Changhe LI;Wenfeng DING;Yun CHEN;Cong MAO;Xuefeng XU;Bo LIU;Dazhong WANG;Hao Nan LI;Yanbin ZHANG;Zafar SAID;Sujan DEBNATH;Muhammad JAMIL;Hafiz Muhammad ALI;Shubham SHARMA-School of Mechanical and Automotive Engineering,Qingdao University of Technology,Qingdao 266520,China;College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Chengdu Tool Research Institute Co.,Ltd.Chengdu 610500,China;College of Automotive and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410114,China;Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education&Zhejiang Province,Zhejiang University of Technology,Hangzhou 310032,China;Sichuan Future Aerospace Industry LLC.,Shifang 618400,China;School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China;School of Aerospace,University of Nottingham Ningbo China,Ningbo 315100,China;College of Engineering,University of Sharjah,Sharjah 27272,United Arab Emirates;Mechanical Engineering Department,Curtin University,Miri 98009,Malaysia;Mechanical Engineering Department,King Fahd University of Petroleum and Minerals,Dhahran 31261,Saudi Arabia;Department of Mechanical Engineering and Advanced Materials Science,Council of Scientific and Industrial Research(CSIR)-Central Leather Research Institute(CLRI),Regional Center for Extension and Development,Jalandhar 144021,India
A hybrid machine learning model for predicting continuous cooling transformation diagrams in welding heat-affected zone of low alloy steels
Xiaoxiao Geng;Xinping Mao;Hong-Hui Wu;Shuize Wang;Weihua Xue;Guanzhen Zhang;Asad Ullah;Hao Wang-Beijing Advanced Innovation Center for Materials Genome Engineering,Collaborative Innovation Center of Steel Technology,University of Science and Technology Beijing,Beijing 100083,China;School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;School of Materials Science and Engineering,Liaoning Technical University,Fuxin 123000,China;Metals and Chemistry Research Institute,China Academy of Railway Sciences,Beijing 100081,China;Department of Mathematical Sciences,Karakoram International University,Gilgit-Baltistan,15100,Pakistan
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。