首站-论文投稿智能助手
典型文献
Influence of pre-synthesized Al2O3-SiC composite powder from clay on properties of low-carbon MgO-C refractories
文献摘要:
To improve the properties of low-carbonization of MgO-C refractories,the introduction of composite additives is an effective strategy.Al2O3-SiC composite powder was prepared from clay using electromagnetic induction heating and carbon embedded methods.Further,the Al2O3-SiC composite powder synthesized by electromagnetic induction heating at 600 A was added into low-carbon MgO-C refractories(4 wt.%)to improve their properties.The results showed that when the addition amount of Al2O3-SiC composite powder is within the range of 2.5-5.0 wt.%,the properties of low-carbon MgO-C samples were significantly improved,e.g.,the apparent porosity of 7.58%-8.04%,the bulk density of 2.98-2.99 g cm-3,the cold compressive strength of 55.72-57.93 MPa,the residual strength after three air quenching at 1100℃of 74.86%-78.04%,and the decarburized layer depth after oxidized at 1400℃for 2 h of 14.03-14.87 mm.Consequently,the idea for the rapid synthesis of Al2O3-SiC composite powder provides an alternative low-carbon MgO-C refractories performance optimization strategy.
文献关键词:
作者姓名:
Bei-yue Ma;Xin-ming Ren;Zhi Gao;Fan Qian;Zhao-yang Liu;Guo-qi Liu;Jing-kun Yu;Gao-feng Fu
作者机构:
Key Laboratory for Ecological Metallurgy of Multimetallic Mineral(Ministry of Education),Shenyang 110819,Liaoning,China;School of Metallurgy,Northeastern University,Shenyang 110819,Liaoning,China;State Key Laboratory of Advance Refractories,Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.,Luoyang 471039,Henan,China
引用格式:
[1]Bei-yue Ma;Xin-ming Ren;Zhi Gao;Fan Qian;Zhao-yang Liu;Guo-qi Liu;Jing-kun Yu;Gao-feng Fu-.Influence of pre-synthesized Al2O3-SiC composite powder from clay on properties of low-carbon MgO-C refractories)[J].钢铁研究学报(英文版),2022(07):1080-1088
A类:
refractories,decarburized
B类:
Influence,synthesized,Al2O3,SiC,composite,powder,from,clay,properties,low,MgO,To,carbonization,introduction,additives,effective,strategy,was,prepared,using,electromagnetic,induction,heating,embedded,methods,Further,by,added,into,wt,their,results,showed,that,when,addition,amount,within,range,samples,were,significantly,improved,apparent,porosity,bulk,density,cold,compressive,strength,residual,after,three,air,quenching,layer,depth,oxidized,Consequently,idea,rapid,synthesis,provides,alternative,performance,optimization
AB值:
0.46486
相似文献
Structure-dependent electromagnetic wave absorbing properties of bowl-like and honeycomb TiO2/CNT composites
Hua Jian;Qinrui Du;Qiaoqiao Men;Li Guan;Ruosong Li;Bingbing Fan;Xin Zhang;Xiaoqin Guo;Biao Zhao;Rui Zhang-Henan Key Laboratory of Aeronautical Materials and Application Technology,School of Material Science and Engineering,Zhengzhou University of Aeronautics,Zhengzhou 450046,China;School of Chemical Engineering,Northwest University,Xi'an 710069,China;Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology,College of Chemical and Biological Engineering,Zhejiang University,Hangzhou 310027,China;School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450001,China;Zhengzhou Research Institute for Abrasives & Grinding Co.,Ltd.,Zhengzhou 450001,China;School of Material Science and Engineering,Luoyang Institute of Science and Technology,Luoyang 471023,China
Highly transmitted silver nanowires-SWCNTs conductive flexible film by nested density structure and aluminum-doped zinc oxide capping layer for flexible amorphous silicon solar cells
Shunliang Gao;Xiaohui Zhao;Qi Fu;Tianchi Zhang;Jun Zhu;Fuhua Hou;Jian Ni;Chengjun Zhu;Tiantian Li;Yanlai Wang;Vignesh Murugadoss;Gaber A.M.Mersal;Mohamed M.Ibrahim;Zeinhom M.El-Bahy;Mina Huang;Zhanhu Guo-The Key Laboratory of Semiconductor Photovoltaic Technology at Universities of Inner Mongolia Autonomous Region,College of Physical Science and Technology,Inner Mongolia University,Hohhot 010021,China;Department of Electronic Science and Technology,School of Electronic Information and Optical Engineering,Nankai University,Tianjin 300350,China;Advanced Materials Division,Engineered Multifunctional Composites(EMC)Nanotech LLC,Knoxville,TN 37934,United States;Integrated Composites Laboratory(ICL),Department of Chemical and Bimolecular Engineering,University of Tennessee,Knoxville,TN 37996,United States;Department of Chemistry,College of Science,Taif University,P.O.Box 11099,Taif 21944,Saudi Arabia;Department of Chemistry,Faculty of Science,Al-Azhar University,Nasr City 11884,Cairo,Egypt;College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。