典型文献
                CNT toughened aluminium and CFRP interface for strong adhesive bonding
            文献摘要:
                    This study presents a simple technique for strengthening the adhesive-bond strength between aluminium (Al) substrate and carbon fibre reinforced polymer (CFRP) utilising resin pre-coating (RPC) with carbon nanotubes (CNTs). The CNT-containing RPC solution with 90 wt%acetone and 10 wt%resin (without hardener) was applied onto Al substrates, where micro-/nano-vertical channels had been created by chemical or mechanical surface treatments to accommodate CNTs. RPC was able to fill all micro-/nano-cavities over the Al substrate surface, then CNTs were pulled into those vertical micro-channels by the capillary action generated from acetone evaporation. Normal epoxy adhesive (resin+hardener) was applied after the CNT-containing RPC treatment. CNTs bridging across the interface between the adhesive joint and Al substrate and sealing of micro-/nano-cavities by RPC effectively enhanced the interfacial shear bond strength between the Al substrate and CFRP by 30–100%depending on the Al substrate surface profiles. Al substrates with two different chemical treatments were compared in this study for the effectiveness of CNT interfacial reinforcement. Results from a steel substrate after sandblasting were also included for comparison.
                文献关键词:
                    
                中图分类号:
                    作者姓名:
                    
                        Gang Han;Bo Tan;Fei Cheng;Binhua Wang;Yee-Kwong Leong;Xiaozhi Hu
                    
                作者机构:
                    Department of Mechanical Engineering, University of Western Australia, Perth, WA, 6009, Australia;Shaoxing Baojing Composite Materials Co., Ltd, Shaoxing, 312073, PR China;School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang, 621000, PR China;Key Laboratory of Road Construction Technology and Equipment, MOE, Chang'an University Xi'an, 710064, PR China;Department of Chemical Engineering, University of Western Australia, Perth, WA, 6009, Australia
                文献出处:
                    
                引用格式:
                    
                        [1]Gang Han;Bo Tan;Fei Cheng;Binhua Wang;Yee-Kwong Leong;Xiaozhi Hu-.CNT toughened aluminium and CFRP interface for strong adhesive bonding)[J].纳米材料科学(英文版),2022(03):266-275
                    
                A类:
                hardener,resin+hardener,sandblasting
                B类:
                    toughened,aluminium,CFRP,interface,strong,adhesive,bonding,This,study,presents,simple,technique,strengthening,between,carbon,fibre,reinforced,polymer,utilising,coating,RPC,nanotubes,CNTs,containing,solution,wt,acetone,without,was,applied,onto,substrates,where,micro,vertical,channels,had,been,created,by,chemical,mechanical,surface,treatments,accommodate,able,fill,all,cavities,over,were,pulled,into,those,capillary,action,generated,from,evaporation,Normal,epoxy,after,bridging,across,joint,sealing,effectively,enhanced,interfacial,shear,depending,profiles,two,different,compared,this,effectiveness,reinforcement,Results,steel,also,included,comparison
                AB值:
                    0.484632
                相似文献
                
            机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。