首站-论文投稿智能助手
典型文献
Effects of stretching/shrinking on the thermal performance of a fully wetted convective-radiative longitudinal fin of exponential profile
文献摘要:
The present investigation focuses on the thermal performance of a fully wet stretching/shrinking longitudinal fin of exponential profile coated with a mechanism like a conveyer belt. The modeled equation is non-dimensionalized and solved by applying the Runge-Kutta-Fehlberg (RKF) method. The effects of parameters such as the wet parameter, the fin shape parameter, and the stretching/shrinking parameter on the heat transfer and thermal characteristics of the fin are graphically analyzed and discussed. It is inferred that the negative effects of motion and internal heat generation on the fin heat transfer rate can be lessened by setting a shrinking mechanism on the fin surface. The current examination is inclined towards practical applications and is beneficial to the design of fins.
文献关键词:
作者姓名:
B.J.GIREESHA;M.L.KEERTHI;G.SOWMYA
作者机构:
Department of PG Studies and Research in Mathematics,Kuvempu University,Shankaraghatta 577451,India;Department of PG Mathematics,The National College(Auto),Bangalore 560070,India
引用格式:
[1]B.J.GIREESHA;M.L.KEERTHI;G.SOWMYA-.Effects of stretching/shrinking on the thermal performance of a fully wetted convective-radiative longitudinal fin of exponential profile)[J].应用数学和力学(英文版),2022(03):389-402
A类:
conveyer,dimensionalized
B类:
Effects,stretching,shrinking,thermal,performance,fully,wetted,convective,radiative,longitudinal,exponential,profile,present,investigation,focuses,coated,mechanism,like,belt,modeled,equation,solved,by,applying,Runge,Kutta,Fehlberg,RKF,method,effects,parameters,such,as,shape,heat,transfer,characteristics,are,graphically,analyzed,discussed,It,inferred,that,negative,motion,internal,generation,rate,can,lessened,setting,surface,current,examination,inclined,towards,practical,applications,beneficial,design,fins
AB值:
0.525552
相似文献
Effects of the initial perturbations on the Rayleigh-Taylor-Kelvin-Helmholtz instability system
Feng Chen;Aiguo Xu;Yudong Zhang;Yanbiao Gan;Bingbing Liu;Shuang Wang-School of Aeronautics,Shan Dong Jiaotong University,Jinan 250357,China;Laboratory of Computational Physics,Institute of Applied Physics and Computational Mathematics,P.O.Box 8009-26,Beijing 100088,China;HEDPS,Center for Applied Physics and Technology,and College of Engineering,Peking University,Beijing 100871,China;State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081,China;School of Mechanics and Safety Engineering,Zhengzhou University,Zhengzhou 450001,China;Hebei Key Laboratory of Trans-Media Aerial Underwater Vehicle,North China Institute of Aerospace Engineering,Langfang 065000,China;Naval Architecture and Port Engineering College,Shan Dong Jiaotong University,Weihai 264200,China;School of Science,Shandong Jianzhu University,Jinan 250101,China
Nano-enhanced biolubricant in sustainable manufacturing:From processability to mechanisms
Yanbin ZHANG;Hao Nan LI;Changhe LI;Chuanzhen HUANG;Hafiz Muhammad ALI;Xuefeng XU;Cong MAO;Wenfeng DING;Xin CUI;Min YANG;Tianbiao YU;Muhammad JAMIL;Munish Kumar GUPTA;Dongzhou JIA;Zafar SAID-School of Mechanical and Automotive Engineering,Qingdao University of Technology,Qingdao 266520,China;School of Aerospace,University of Nottingham Ningbo China,Ningbo 315100,China;School of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China;Mechanical Engineering Department,King Fahd University of Petroleum and Minerals,Dhahran 31261,Saudi Arabia;Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education&Zhejiang Province,Zhejiang University of Technology,Hangzhou 310032,China;College of Automotive and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410114,China;College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;School of Mechanical Engineering&Automation,Northeastern University,Shenyang 110006,China;Industrial Engineering Department,University of Engineering and Technology Taxila,Taxila 47080,Pakistan;School of Mechanical Engineering,Shandong University,Jinan 250061,China;College of Mechanical Engineering and Automation,Liaoning University of Technology,Jinzhou 121001,China;College of Engineering,University of Sharjah,Sharjah 27272,United Arab Emirates
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。