首站-论文投稿智能助手
典型文献
The surface activation of boron to improve ignition and combustion characteristic
文献摘要:
Boron is a very promising and highly attractive fuel because of high calorific value.However,the practical applications in explosives and propellants of boron have been limited by long ignition delay time and low combustion efficiency.Herein,nano-Al and graphene fluoride(GF)as surface activated materials are employed to coat boron(B)particles to improve ignition and combustion performance.The reaction heat of nano-Al coated B/KNO3 and GF coated B/KNO3 are 1116.83 J/g and 862.69 J/g,respectively,which are higher than that of pure B/KNO3(823.39 J/g).The ignition delay time of B/KNO3 could be reduced through nano-Al coating.The shortest ignition delay time is only 75 ms for B coated with nano-Al of 8 wt%,which is much shorter than that of pure B/KNO3(109 ms).However,the ignition delay time of B/KNO3 coated with GF has been increased from 109 to 187 ms.B coated with GF and nano-Al shown significantly influence on the pressure output and flame structure of B/KNO3.Furthermore,the effects of B/O ratios on the pressure output and ignition delay time have been further fully studied.For B/KNO3 coated with nano-Al and GF,the highest pressures are 88 KPa and 59 KPa for B/O ratio of 4:6,and the minimum ignition delay time are 94 ms and 148 ms for B/O ratio of 7:3.Based on the above results,the reaction process of boron coated with GF and nano-Al has been proposed to understand combustion mechanism.
文献关键词:
作者姓名:
Jian Wang;Jun Wang;Yaofeng Mao;Rufang Peng;Fude Nie
作者机构:
State Key Laboratory of Environment-friendly Energy Materials,Southwest University of Science and Technology,No.59,Qinglong Road,Mianyang City,Sichuan,621010,China;Institute of Chemical Materials,China Academy of Engineering Physics,No.64,Mianshan Road,Mianyang City,Sichuan,621999,China
文献出处:
引用格式:
[1]Jian Wang;Jun Wang;Yaofeng Mao;Rufang Peng;Fude Nie-.The surface activation of boron to improve ignition and combustion characteristic)[J].防务技术,2022(09):1679-1687
A类:
B类:
surface,activation,boron,improve,ignition,combustion,characteristic,Boron,very,promising,highly,attractive,fuel,because,calorific,value,However,practical,applications,explosives,propellants,have,been,limited,by,long,delay,low,efficiency,Herein,nano,graphene,fluoride,GF,activated,materials,are,employed,particles,performance,reaction,heat,coated,KNO3,respectively,which,higher,than,that,pure,could,reduced,through,coating,shortest,only,ms,wt,much,shorter,has,increased,from,shown,significantly,influence,output,flame,structure,Furthermore,effects,ratios,further,fully,studied,For,highest,pressures,KPa,minimum,Based,above,results,process,proposed,understand,mechanism
AB值:
0.432663
相似文献
Effect of solid-solution strengthening on deformation mechanisms and strain hardening in medium-entropy V1-xCrxCoNi alloys
Hyun Chung;Dae Woong Kim;Woo Jin Cho;Heung Nam Han;Yuji Ikeda;Shoji Ishibashi;Fritz K?rmann;Seok Su Sohn-Department of Materials Science and Engineering,Korea University,Seoul 02841,South Korea;Center for High Entropy Alloys,Pohang University of Science and Technology,Pohang 37673,South Korea;Department of Materials Science and Engineering and Research Institute of Advanced Materials,Seoul National University,Seoul 08826,South Korea;Institute for Materials Science,University of Stuttgart,Pfaffenwaldring 55,Stuttgart 70569,Germany;Computational Materials Design,Max-Planck-Institut für Eisenforschung GmbH,Max-Planck-Strabe 1,Düisseldorf 40237,Germany;Research Center for Computational Design of Advanced Functional Materials(CD-Fmat),National Institute of Advanced Industrial Science and Technology(AIST),Tsukuba,Ibaraki 305-8568,Japan;Department of Materials Science and Engineering,Delft University of Technology,Mekelweg,2,Delft 2628 CD,the Netherlands
Hybrid post-processing effects of magnetic abrasive finishing and heat treatment on surface integrity and mechanical properties of additively manufactured Inconel 718 superalloys
Kun Li;Ruijin Ma;Ming Zhang;Wen Chen;Xiaobin Li;David Z.Zhang;Qian Tang;Lawrence E.Murr;Jinfeng Li;Huajun Cao-State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China;Chongqing Key Laboratory of Metal Additive Manufacturing(3D Printing),Chongqing University,Chongqing 400044,China;College of Engineering,Mathematics and Physical Sciences,University of Exeter,North Park Road,Exeter EX4 4QF,UK;W.M.Keck Center for 3D Innovation,University of Texas at El Paso,El Paso,TX 79968,USA;Department of Metallurgical,Materials and Biomedical Engineering,University of Texas at El Paso,El Paso,TX 79968,USA;Institute of Materials,China Academy of Engineering Physics,Mianyang 621908,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。