FAILED
首站-论文投稿智能助手
典型文献
Effect of the microporous structure of ammonium perchlorate on thermal behaviour and combustion characteristics
文献摘要:
Ammonium perchlorate(AP)is the component with the highest content in composite propellants,and it plays a crucial role in propellant performance.In view of the effects of low-temperature AP thermal decomposition on thermal safety and combustion characteristics,porous ammonium perchlorate(PAP)samples with different mass losses were first prepared by thermal convection heating,and the structures were characterized and analysed.Second,the effects of decomposition degree on the thermal decom-position characteristics of PAP were studied by DSC-TG.Finally,the combustion characteristics of AP/Al binary mixtures were tested with high-speed photography and in a sealed bomb.The results showed that low-temperature decomposition of AP resulted in formation of porous structures for AP particles.The pores first appeared near the surfaces of the particles and began from multiple points at the same time.The pores increased in size to approximately 5 μm and then expanded,and finally,the AP particles were full of pores.After partial decomposition,the crystal structure of AP remained unchanged,but the low and high decomposition temperatures decreased obviously.The decomposition rate accelerated.Due to the porous structure of PAP,the combustion rate of the AP/Al system increased obviously with increasing decomposition of AP.The relationship between the combustion rate and the mass loss was approxi-mately linear under open conditions,and it was exponential for a high-pressure environment.A computational model of the combustion process for the AP/Al binary system was established to explain the effects of pore structure and pressure on the combustion process.
文献关键词:
作者姓名:
Hai-jun Zhang;Jian-xin Nie;Gang-ling Jiao;Xing Xu;Xue-yong Guo;Shi Yan;Qing-jie Jiao
作者机构:
State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing,100081,China;Naval Research Institute of PLA,Beijing,100161,China;The Sixth Institute,601 Branch of China Aeronautical Science and Technology Corporation,Hohhot,010076,China
文献出处:
引用格式:
[1]Hai-jun Zhang;Jian-xin Nie;Gang-ling Jiao;Xing Xu;Xue-yong Guo;Shi Yan;Qing-jie Jiao-.Effect of the microporous structure of ammonium perchlorate on thermal behaviour and combustion characteristics)[J].防务技术,2022(07):1156-1166
A类:
B类:
Effect,microporous,ammonium,perchlorate,thermal,behaviour,combustion,characteristics,Ammonium,component,highest,content,composite,propellants,plays,crucial,role,performance,In,view,effects,low,decomposition,safety,PAP,samples,different,mass,losses,were,first,prepared,by,convection,heating,structures,characterized,analysed,Second,degree,studied,DSC,Finally,binary,mixtures,tested,speed,photography,sealed,bomb,results,showed,that,resulted,formation,particles,pores,appeared,surfaces,began,from,multiple,points,same,increased,size,approximately,then,expanded,finally,full,After,partial,crystal,remained,unchanged,but,temperatures,decreased,obviously,accelerated,Due,system,increasing,relationship,between,was,linear,under,open,conditions,exponential,pressure,environment,computational,model,process,established,explain
AB值:
0.456637
相似文献
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant:From mechanisms to application
Xin CUI;Changhe LI;Wenfeng DING;Yun CHEN;Cong MAO;Xuefeng XU;Bo LIU;Dazhong WANG;Hao Nan LI;Yanbin ZHANG;Zafar SAID;Sujan DEBNATH;Muhammad JAMIL;Hafiz Muhammad ALI;Shubham SHARMA-School of Mechanical and Automotive Engineering,Qingdao University of Technology,Qingdao 266520,China;College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Chengdu Tool Research Institute Co.,Ltd.Chengdu 610500,China;College of Automotive and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410114,China;Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education&Zhejiang Province,Zhejiang University of Technology,Hangzhou 310032,China;Sichuan Future Aerospace Industry LLC.,Shifang 618400,China;School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China;School of Aerospace,University of Nottingham Ningbo China,Ningbo 315100,China;College of Engineering,University of Sharjah,Sharjah 27272,United Arab Emirates;Mechanical Engineering Department,Curtin University,Miri 98009,Malaysia;Mechanical Engineering Department,King Fahd University of Petroleum and Minerals,Dhahran 31261,Saudi Arabia;Department of Mechanical Engineering and Advanced Materials Science,Council of Scientific and Industrial Research(CSIR)-Central Leather Research Institute(CLRI),Regional Center for Extension and Development,Jalandhar 144021,India
Novel method for improving iron recovery from electric arc furnace slag:on-site hot modification
Xiang Lu;Xiao-li Huang;Ru-fei Wei;Wen Chen;Da-qiang Cang;Fei-hua Yang;Chun-lei Pu-Changsha Research Institute of Mining&Metallurgy Co.,Ltd.,Changsha 410012,Hunan,China;School of Metallurgy and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;Technological Institute of Development and Strategy Studies,Panzhihua 617000,Sichuan,China;School of Metallurgical Engineering,Anhui University of Technology,Ma'anshan 243000,Anhui,China;State Key Laboratory of Solid Waste Reuse for Building Materials(SKL-SWR),Beijing Building Materials Academy of Sciences Research(BBMA),Beijing 100083,China;Iron and Steel Technology Research Institute,HUATIAN Engineering&Technology Corporation,MCC,Nanjing 210019,Jiangsu,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。