首站-论文投稿智能助手
典型文献
Hot compressive deformation of eutectic Al–17at% Cu alloy on the interface of the Cu–Al composite plate produced by horizontal continuous casting
文献摘要:
On the interface of the Cu–Al composite plate from horizontal continuous casting, the eutectic microstructure layer thickness ac-counts for more than 90% of the total interface thickness, and the deformation in rolling forming plays an important role in the quality of the composite plate. The eutectic microstructure material on the interface of the Cu–Al composite plate was prepared by changing the cooling rate of ingot solidification and the deformation in hot compression was investigated. The results show that when the deformation temperature is over 300℃, the softening effect of dynamic recrystallization of α-Al is greater than the hardening effect, and uniform plastic deformation of eutectic microstructure is caused. The constitutive equation of flow stress in the eutectic microstructure layer was established by Arrhenius hy-perbolic-sine mathematics model, providing a reliable theoretical basis for the deformation of the Cu–Al composite plate.
文献关键词:
作者姓名:
Jun Wang;Fan Zhao;Guoliang Xie;Jiaxuan Xu;Xinhua Liu
作者机构:
Key Laboratory for Advanced Materials Processing(MOE),Institute for Advanced Materials and Technology,University of Science and Technology Beijing,Beijing 100083,China;State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China
引用格式:
[1]Jun Wang;Fan Zhao;Guoliang Xie;Jiaxuan Xu;Xinhua Liu-.Hot compressive deformation of eutectic Al–17at% Cu alloy on the interface of the Cu–Al composite plate produced by horizontal continuous casting)[J].矿物冶金与材料学报,2022(08):1578-1588
A类:
17at,perbolic
B类:
Hot,compressive,deformation,eutectic,alloy,interface,composite,plate,produced,by,horizontal,continuous,casting,On,from,microstructure,layer,thickness,counts,more,than,total,rolling,forming,plays,important,role,quality,material,was,prepared,changing,cooling,rate,ingot,solidification,hot,compression,investigated,results,show,that,when,temperature,over,softening,effect,dynamic,recrystallization,greater,hardening,uniform,plastic,caused,constitutive,equation,flow,stress,established,Arrhenius,hy,sine,mathematics,model,providing,reliable,theoretical,basis
AB值:
0.497501
相似文献
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。