首站-论文投稿智能助手
典型文献
On the superplastic deformation mechanisms of near-α TNW700 titanium alloy
文献摘要:
The new near-α TNW700 titanium alloy is a potential candidate material for high performance ultra-sonic/hypersonic aircrafts,which is designed for short-term service at 700℃.This study systematically investigated the superplastic deformation microstructure evolution and mechanism of TNW700 alloy at different strain rates and true strains at 925℃.Results show that TNW700 alloy exhibits excellent super-plastic behavior in a constant strain rate range of 0.0005-0.005 s-1 with elongation above 400%.The peak stress decreases with decreasing strain rate,which is related to the increase ofβ-phase volume fraction caused by the increase of thermal exposure time.In addition,significant strain hardening is observed in early-middle stage of superplastic deformation,and flow softening is followed in middle-late stage.To ra-tionalize these complex flow behaviors,electron backscatter diffraction(EBSD)and high resolution trans-mission electron microscopy(HRTEM)were used to characterize the microstructure.Strain hardening is correlated to the synergistic effect ofβ grain growth,dislocation accumulation,silicide precipitate,and solid solution strengthening of α phase.Continuous dynamic recrystallization(CDRX)induced the frag-mentation of primary α grains in middle-late stage of superplastic deformation,and the refinement of αgrains,the increase of β phase volume fraction and dynamic dislocation recovery are main causes of high strain softening.In addition,EBSD and TEM observations confirmed texture randomization,fine equiaxed primary α grains and intragranular dislocation movement,indicating that grain boundary sliding(GBS)accommodated by dislocation sliding/climb is the dominant superplastic deformation mechanism of TNW700 alloy.
文献关键词:
作者姓名:
Lixia Ma;Min Wan;Weidong Li;Jie Shao;Xiaoning Han;Jichun Zhang
作者机构:
School of Mechanical Engineering and Automation,Beihang University,Beijing 100191,China;AVIC Manufacturing Technology Institute,Beijing 100024,China
引用格式:
[1]Lixia Ma;Min Wan;Weidong Li;Jie Shao;Xiaoning Han;Jichun Zhang-.On the superplastic deformation mechanisms of near-α TNW700 titanium alloy)[J].材料科学技术(英文版),2022(13):173-185
A类:
TNW700,tionalize
B类:
On,superplastic,deformation,mechanisms,near,titanium,alloy,new,potential,candidate,material,high,performance,ultra,hypersonic,aircrafts,which,designed,short,term,service,This,study,systematically,investigated,microstructure,evolution,different,rates,true,strains,Results,show,that,exhibits,excellent,constant,range,elongation,above,peak,stress,decreases,decreasing,increase,phase,volume,caused,by,thermal,exposure,In,addition,significant,hardening,observed,early,middle,stage,flow,softening,followed,To,these,complex,behaviors,electron,backscatter,diffraction,EBSD,resolution,trans,mission,microscopy,HRTEM,were,characterize,Strain,correlated,synergistic,effect,growth,dislocation,accumulation,silicide,precipitate,solid,strengthening,Continuous,dynamic,recrystallization,CDRX,induced,frag,mentation,primary,grains,refinement,recovery,are,main,causes,observations,confirmed,texture,randomization,equiaxed,intragranular,movement,indicating,boundary,sliding,GBS,accommodated,climb,dominant
AB值:
0.520076
相似文献
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。