典型文献
Improving Ductility and Anisotropy by Dynamic Recrystallization in Ti/Mg Laminated Metal Composite
文献摘要：
Ti/Mg laminated metal composites(LMCs)were processed by hot roll bonding and subsequent annealing at 200℃and 300℃for 1 h,and the effect of dynamic recrystallization on the microstructure and anisotropy behavior was investigated in detail.The results revealed that,in both as-rolled and annealed Ti/Mg LMCs,the inhomogeneous distribution in the microstructure of Mg layers near the interface and near the center was related to the effect of friction between the roller and sheet surface and uncoordinated deformation between constituent layers.With increasing annealing temperature,Ti/Mg LMCs exhibited excellent elongation without sacrificing strength properties,which was mainly due to the improvement in bonding strength and the increasing strain gradient at the interface between soft and hard layers after annealing treatment.Besides,the increasing Schmid factors(SFs)of prismaticslip and pyramidalslip in Mg layers contributed to the improved plastic deformation ability of Ti/Mg LMCs.The experimental analysis indicated that the presence of Mg alloys resulted in the microstructure and mechanical properties of LMCs were different along various loading directions,and annealing treatment can effectively inhibit the anisotropic behavior of Ti/Mg LMCs resulting from the weakening of basal texture in the Mg layer.
文献关键词：
中图分类号：
作者姓名：
Taiqian Mo;Huaqiang Xiao;Bo Lin;Wei Li;Kai Ma
作者机构：
School of Mechanical Engineering,Guizhou University,Guiyang 550025,China;College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China;Shi-Changxu Innovation Center for Advanced Materials,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China
文献出处：
引用格式：
[1]Taiqian Mo;Huaqiang Xiao;Bo Lin;Wei Li;Kai Ma-.Improving Ductility and Anisotropy by Dynamic Recrystallization in Ti/Mg Laminated Metal Composite)[J].金属学报（英文版）,2022(12):1946-1958
A类：
LMCs
B类：
Improving,Ductility,Anisotropy,by,Dynamic,Recrystallization,Ti,Mg,Laminated,Metal,Composite,laminated,metal,composites,were,processed,hot,bonding,subsequent,annealing,dynamic,recrystallization,microstructure,anisotropy,behavior,was,investigated,detail,results,revealed,that,both,rolled,annealed,inhomogeneous,distribution,layers,near,interface,center,related,friction,between,roller,sheet,surface,uncoordinated,deformation,constituent,With,increasing,temperature,exhibited,excellent,elongation,without,sacrificing,strength,properties,which,mainly,due,improvement,strain,gradient,soft,hard,after,treatment,Besides,Schmid,factors,SFs,prismatic,slip,pyramidal,c+a,contributed,improved,plastic,ability,experimental,analysis,indicated,presence,alloys,resulted,mechanical,different,along,various,loading,directions,can,effectively,inhibit,anisotropic,resulting,from,weakening,basal,texture
AB值：
0.587422
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
