首站-论文投稿智能助手
典型文献
Investigation of the heat distribution in dry friction systems during fade and recovery using fiber-optic sensing and infrared technology
文献摘要:
The design of dry-running friction pairings and systems determines not only their installation space and costs, but also their reliability under critical load conditions, for example in emergencies, in the case of faults, and in the event of misuse. While knowledge of the contact pattern is highly important for the development of clutches and brakes, the contact-related measurement of the temperature of these systems has not yet been solved in a satisfactory manner. Despite its importance, the temperature distribution has only been measured in a few studies. Typically, temperature measurements of complete clutches and brakes are carried out using thermocouples only. In this study, a new innovative test setup is presented. This setup is able to measure the heat distribution of the lining and the steel disk of a brake with high spatial resolution by means of fiber optic sensing technology and thermography. As a novelty, it enables measurement of the heat distribution and allows to correlate it with the fade and recovery behavior. Contrary to the expectations, the contact pattern is heterogeneous in circumferential direction. Possible causes are discussed using simulation results. Along with surface analysis, the new setup contributes to the investigation of the causes of fade and recovery.
文献关键词:
作者姓名:
Albert ALBERS;Thomas KLOTZ;Chris FINK;Sascha OTT
作者机构:
IPEK–Institute of Product Engineering,Karlsruhe Institute of Technology,Baden Wurttemberg 76131,Germany
文献出处:
引用格式:
[1]Albert ALBERS;Thomas KLOTZ;Chris FINK;Sascha OTT-.Investigation of the heat distribution in dry friction systems during fade and recovery using fiber-optic sensing and infrared technology)[J].摩擦(英文),2022(03):422-435
A类:
pairings,thermocouples
B类:
Investigation,heat,distribution,dry,friction,systems,during,fade,recovery,using,fiber,optic,sensing,infrared,technology,design,running,determines,not,only,their,installation,space,costs,also,reliability,under,critical,load,conditions,example,emergencies,case,faults,event,misuse,While,knowledge,contact,pattern,highly,important,development,clutches,brakes,related,temperature,these,has,yet,been,solved,satisfactory,manner,Despite,its,importance,measured,few,studies,Typically,measurements,complete,carried,out,this,study,new,innovative,test,setup,presented,This,lining,steel,disk,spatial,resolution,by,means,thermography,novelty,enables,allows,correlate,behavior,Contrary,expectations,heterogeneous,circumferential,direction,Possible,causes,discussed,simulation,results,Along,surface,analysis,contributes,investigation
AB值:
0.560403
相似文献
Dynamic analysis of heat extraction rate by supercritical carbon dioxide in fractured rock mass based on a thermal-hydraulic-mechanics coupled model
Chunguang Wang;Xingkai Shi;Wei Zhang;Derek Elsworth;Guanglei Cui;Shuqing Liu;Hongxu Wang;Weiqiang Song;Songtao Hu;Peng Zheng-College of Energy and Mining Engineering,Shandong University of Science and Technology,Qingdao 266590,China;New-energy Development Center of Sinopec Shengli Oilfield,Dongying 257001,China;Energy and Mineral Engineering and G3 Center,Penn State University,University Park,PA 16802,USA;Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines,Northeastern University,Shenyang 110004,China;Shandong Provincial Geo-Mineral Engineering Co.,Ltd,Jinan 250013,China;Qingdao Wofu New Energy Science and Technology Co.,Ltd,Qingdao 266010,China
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant:From mechanisms to application
Xin CUI;Changhe LI;Wenfeng DING;Yun CHEN;Cong MAO;Xuefeng XU;Bo LIU;Dazhong WANG;Hao Nan LI;Yanbin ZHANG;Zafar SAID;Sujan DEBNATH;Muhammad JAMIL;Hafiz Muhammad ALI;Shubham SHARMA-School of Mechanical and Automotive Engineering,Qingdao University of Technology,Qingdao 266520,China;College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Chengdu Tool Research Institute Co.,Ltd.Chengdu 610500,China;College of Automotive and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410114,China;Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education&Zhejiang Province,Zhejiang University of Technology,Hangzhou 310032,China;Sichuan Future Aerospace Industry LLC.,Shifang 618400,China;School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China;School of Aerospace,University of Nottingham Ningbo China,Ningbo 315100,China;College of Engineering,University of Sharjah,Sharjah 27272,United Arab Emirates;Mechanical Engineering Department,Curtin University,Miri 98009,Malaysia;Mechanical Engineering Department,King Fahd University of Petroleum and Minerals,Dhahran 31261,Saudi Arabia;Department of Mechanical Engineering and Advanced Materials Science,Council of Scientific and Industrial Research(CSIR)-Central Leather Research Institute(CLRI),Regional Center for Extension and Development,Jalandhar 144021,India
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。