首站-论文投稿智能助手
典型文献
Skin effect of WC-8 wt% Co alloy by micro wave sintering
文献摘要:
To investigate the microwave effect on the WC-Co alloys,WC-8 wt%Co alloy was fabricated by microwave sintering(MWS)in this paper.The results show that decarburization layer forms on the surface of the microwave-sintered samples.WC grain coarsening in the core area is strongly suppressed by the decarburization effect.In addition,the microstructure of the MWS-fabri-cated alloy was compared to that of the alloy sintered by vacuum sintering(VS).Microstructural investigations by transmission electron microscopy(TEM)and energy dis-persive spectroscopy(EDS)show that more tungsten(29.50 wt%)is dissolved in the cobalt binder phase in microwave-sintered alloy than that in the vacuum-sintered samples.Finally,the formation mechanism of the surface layer by skin effect was discussed.
文献关键词:
作者姓名:
Rui Bao;Jian-Hong Yi;Yuan-Dong Peng;Feng-Xian Li;Shang Li;Shao-Yu Li
作者机构:
School of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,China;State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China
引用格式:
[1]Rui Bao;Jian-Hong Yi;Yuan-Dong Peng;Feng-Xian Li;Shang Li;Shao-Yu Li-.Skin effect of WC-8 wt% Co alloy by micro wave sintering)[J].稀有金属(英文版),2022(04):1364-1368
A类:
B类:
Skin,effect,WC,wt,Co,by,sintering,To,investigate,microwave,alloys,was,fabricated,MWS,this,paper,results,show,that,decarburization,layer,forms,surface,sintered,samples,grain,coarsening,core,area,strongly,suppressed,In,addition,microstructure,compared,vacuum,VS,Microstructural,investigations,transmission,electron,microscopy,TEM,energy,persive,spectroscopy,EDS,more,tungsten,dissolved,cobalt,binder,phase,than,Finally,formation,mechanism,skin,discussed
AB值:
0.498471
相似文献
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。