典型文献
Evaluation and improvement of pearlite microstructure and mechanical properties in 45Cr4NiMoV and 50Cr5NiMoV steels
文献摘要：
The microstructure and mechanical properties of pearlite in 45Cr4NiMoV and 50Cr5NiMoV steels were studied and compared.The microstructural characteristics of pearlite of two steels were carefully examined by optical microscopy,scanning electron microscopy and transmission electron microscopy(TEM),and the type,size and relative amount of extracted carbide particles were analyzed by X-ray diffraction and TEM coupled with selected area electron diffraction.The hardness,tensile property,impact and fracture toughness of pearlite of two steels were also evaluated.Besides,the carbide dissolution kinetics of 45Cr4NiMoV and 50Cr5NiMoV steels were clarified.The results indicated that the carbides in 50Cr5NiMoV steel exhibited higher dissolution temperature than those in 45Cr4NiMoV steel,which induced different morphologies of pearlite after eutectoid transformation.Compared to the pearlite with lamellar M23C6 carbides in 45Cr4NiMoV steel,the pearlite with the mixture of spheroidized M7C3 and lamellar M23C6 carbides in 50Cr5NiMoV steel possessed higher impact and plane-strain fracture toughness but lower hardness and strength,because different pearlite morphologies led to different mechanical properties.In order to further improve the comprehensive properties of the steels,the fraction of M7C3 for the material with acceptable properties was examined and dissolution kinetic of M7C3 was calculated.Therefore,the austenitizing temperature and holding time could be appropriately selected to keep enough undissolved M7C3 in the steels.
文献关键词：
中图分类号：
作者姓名：
Kai-quan Liu;Xue-jiao Zhang;Xiao-yang Song;Lin Zhao;Lin Zhu
作者机构：
State Key Laboratory of Metastable Materials Science and Technology,Yanshan University,Qinhuangdao 066004,Hebei,China;Tianjin Heavy Industries Research&Development Co.,Ltd.,CFHI,Tianjin 300457,China;China First Heavy Industry,Qiqihar 161042,Heilongjiang,China;Central Iron and Steel Research Institute Co.,Ltd.,Beijing 100081,China
文献出处：
引用格式：
[1]Kai-quan Liu;Xue-jiao Zhang;Xiao-yang Song;Lin Zhao;Lin Zhu-.Evaluation and improvement of pearlite microstructure and mechanical properties in 45Cr4NiMoV and 50Cr5NiMoV steels)[J].钢铁研究学报（英文版）,2022(12):1995-2005
A类：
45Cr4NiMoV,50Cr5NiMoV,eutectoid,spheroidized,austenitizing,undissolved
B类：
Evaluation,improvement,pearlite,microstructure,mechanical,properties,steels,were,studied,compared,microstructural,characteristics,two,carefully,examined,by,optical,microscopy,scanning,electron,transmission,TEM,type,size,relative,amount,extracted,particles,analyzed,ray,diffraction,coupled,selected,area,hardness,tensile,property,impact,fracture,toughness,also,evaluated,Besides,dissolution,kinetics,clarified,results,indicated,that,carbides,exhibited,higher,temperature,than,those,which,induced,different,morphologies,after,transformation,Compared,lamellar,M23C6,mixture,M7C3,possessed,plane,strain,but,lower,strength,because,In,order,further,comprehensive,material,acceptable,was,calculated,Therefore,holding,could,appropriately,keep,enough
AB值：
0.394721
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
