首站-论文投稿智能助手
典型文献
Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application as high-performance reinforcements in epoxy nanocomposites
文献摘要:
The nanocomposites of flower-like nickel phyllosilicate particles incorporated into epoxy resin were fabricated via an in-situ mixing process.The flower-like nickel phyllosilicate particles were firstly synthesized using a mild self-sacrificial templating method,and the morphology and lamellar structure were examined carefuilly.Several properties of mechanical,thermal and tribological responses of epoxy nanocompo-sites were performed.It was demonstrated that adequate flower-like nickel phyllosilicate particles dispersed well in the matrix,and the nanocomposites displayed enhanced tensile strength and elastic modulus but decreased elongation at break as expected.In addition,friction coefficient and wear rate were increased first and then decreased along with the particle content,and showed the lowest values at a mass fraction of 5%.Nevertheless,the incorporated flower-like nickel phyllosilicate particles resulted in the continuously increasing thermal stability of epoxy resin(EP)nanocomposites.This study revealed the giant potential of flower-like particles in preparing high-quality EP nanocomposites.
文献关键词:
作者姓名:
Jinian Yang;Xuesong Feng;Shibin Nie;Yuxuan Xu;Zhenyu Li
作者机构:
School of Materials Science and Engineering,State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines,Anhui University of Science and Technology,Huainan 232001,China;School of Safety Science and Engineering,State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines,Anhui University of Science and Technology,Huainan 232001,China
引用格式:
[1]Jinian Yang;Xuesong Feng;Shibin Nie;Yuxuan Xu;Zhenyu Li-.Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application as high-performance reinforcements in epoxy nanocomposites)[J].化学科学与工程前沿,2022(04):484-497
A类:
phyllosilicates,carefuilly,nanocompo
B类:
Self,sacrificial,templating,synthesis,flower,like,nickel,its,application,high,performance,reinforcements,epoxy,nanocomposites,particles,incorporated,into,resin,were,fabricated,via,situ,mixing,process,firstly,synthesized,using,mild,self,method,morphology,lamellar,structure,examined,Several,properties,mechanical,thermal,tribological,responses,performed,It,was,demonstrated,that,adequate,dispersed,well,matrix,displayed,enhanced,tensile,strength,elastic,modulus,but,decreased,elongation,break,expected,In,addition,friction,coefficient,wear,increased,then,along,content,showed,lowest,values,mass,fraction,Nevertheless,resulted,continuously,increasing,stability,EP,This,study,revealed,giant,potential,preparing,quality
AB值:
0.532104
相似文献
Effect of molybdenum on interfacial properties of titanium carbide reinforced Fe composite
Seungchan Cho;Junghwan Kim;Ilguk Jo;Jae Hyun Park;Jaekwang Lee;Hyun-Uk Hong;Bong Ho Lee;Wook Ryol Hwang;Dong-Woo Suh;Sang-Kwan Lee;Sang-Bok Lee-Composites Research Division,Korea Institute of Materials Science(KIMS),Changwon 51508,South Korea;Advanced Materials Engineering,Dong-Eui University,Busan 47340,South Korea;Department of Aerospace and Software Engineering,Gyeongsang National University,Jinju 52828,South Korea;Department of Physics,Pusan National University,Busan 46241,South Korea;Department of Materials Convergence and System Engineering,Changwon National University,Changwon 51140,South Korea;Center for Core Research Facilities,Daegu Gyeongbuk Institute of Science and Technology,Daegu 42988,South Korea;School of Mechanical Engineering,Gyeongsang National University,Jinju 52828,South Korea;Graduate Institute of Ferrous Technology,Pohang University of Science and Technology,Gyeongbuk 37673,South Korea
A high-throughput strategy for rapid synthesis and characterization of Ni-based superalloys
Lei Zhao;Su-Ran Liu;Liang Jiang;Li-Xia Yang;Li-Long Zhu;Hui Wang;Wen-Yu Zhang;Zai-Wang Huang;Yuan-Bin Deng;Christoph Broeckmann;Hai-Liang Huang;Hai-Zhou Wang-Beijing Advanced Innovation Center for Materials Genome Engineering,Beijing Key Laboratory of Metal Materials Characterization,Central Iron and Steel Research Institute,Beijing 100081,China;National Center for Materials Service Safety,University of Science and Technology Beijing,Beijing 100083,China;Institute for Advanced Studies in Precision Materials,Yantai University,Yantai 264005,China;State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China;Institute for Materials Applications in Mechanical Engineering,RWTH Aachen University,Aachen 52062,Germany
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。