首站-论文投稿智能助手
典型文献
Deformation-softening behaviors of high-strength and high-toughness steels used for rock bolts
文献摘要:
In deep ground engineering,the use of high-strength and high-toughness steels for rock bolt can significantly improve its energy absorption capacity.However,the mechanisms and effects of rock loading conditions on this kind of high energy-absorbing steel for rock bolt remain immature.In this study,taking Muzhailing highway tunnel as the background,physically based crystal plasticity simula-tions were performed to understand the effect of rock loading rate and pretension on the deformation behaviors of twinning induced plasticity(TWIP)steel used for rock bolt.The material physical connecting to the underlying microscopic mechanisms of dislocation glide and deformation twinning were incor-porated in numerical modeling.The rock loading conditions were mimicked by the real-time field monitoring data of the NPR bolt/cable equipment installed on the tunnel surrounding rock surface.The results indicate that the bolt rod exhibits pronounced deformation-softening behavior with decrease of the loading rate.There is also a sound deformation-relaxation phenomenon induced by the dramatic decrease of loading rate after pre-tensioning.The high pretension(>600 MPa or 224 kN)can help bolt rod steel resist deformation-softening behavior,especially at low loading rate(<10-1 MPa/s or 10-2 kN/s).The loading rate was found to be a significant factor affecting deformation-softening behavior while the pretension was found to be the major parameter accounting for the deformation-relaxation scenario.The results provide the theoretical basis and technical support for practical applications.
文献关键词:
作者姓名:
Ding Wang;Manchao He;Zhigang Tao;Aipeng Guo;Xuchun Wang
作者机构:
State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing,100083,China;Research Institute for Deep Underground Science and Engineering,China University of Mining&Technology,Beijing,100083,China;School of Civil Engineering,Qingdao University of Technology,Qingdao,266033,China
引用格式:
[1]Ding Wang;Manchao He;Zhigang Tao;Aipeng Guo;Xuchun Wang-.Deformation-softening behaviors of high-strength and high-toughness steels used for rock bolts)[J].岩石力学与岩土工程学报(英文版),2022(06):1872-1884
A类:
Muzhailing,tensioning
B类:
Deformation,softening,behaviors,strength,toughness,steels,used,rock,bolts,In,deep,engineering,significantly,improve,energy,absorption,capacity,However,mechanisms,effects,loading,conditions,this,kind,absorbing,remain,immature,study,taking,highway,tunnel,background,physically,crystal,plasticity,simula,were,performed,understand,pretension,deformation,twinning,induced,TWIP,material,connecting,underlying,microscopic,dislocation,glide,incor,porated,numerical,modeling,mimicked,by,real,field,monitoring,data,NPR,cable,equipment,installed,surrounding,surface,results,indicate,that,rod,exhibits,pronounced,decrease,There,also,sound,relaxation,phenomenon,dramatic,after,kN,help,resist,especially,low,was,found,affecting,while,major,parameter,accounting,scenario,provide,theoretical,basis,technical,support,practical,applications
AB值:
0.469124
相似文献
Dynamic analysis of heat extraction rate by supercritical carbon dioxide in fractured rock mass based on a thermal-hydraulic-mechanics coupled model
Chunguang Wang;Xingkai Shi;Wei Zhang;Derek Elsworth;Guanglei Cui;Shuqing Liu;Hongxu Wang;Weiqiang Song;Songtao Hu;Peng Zheng-College of Energy and Mining Engineering,Shandong University of Science and Technology,Qingdao 266590,China;New-energy Development Center of Sinopec Shengli Oilfield,Dongying 257001,China;Energy and Mineral Engineering and G3 Center,Penn State University,University Park,PA 16802,USA;Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines,Northeastern University,Shenyang 110004,China;Shandong Provincial Geo-Mineral Engineering Co.,Ltd,Jinan 250013,China;Qingdao Wofu New Energy Science and Technology Co.,Ltd,Qingdao 266010,China
Effect of solid-solution strengthening on deformation mechanisms and strain hardening in medium-entropy V1-xCrxCoNi alloys
Hyun Chung;Dae Woong Kim;Woo Jin Cho;Heung Nam Han;Yuji Ikeda;Shoji Ishibashi;Fritz K?rmann;Seok Su Sohn-Department of Materials Science and Engineering,Korea University,Seoul 02841,South Korea;Center for High Entropy Alloys,Pohang University of Science and Technology,Pohang 37673,South Korea;Department of Materials Science and Engineering and Research Institute of Advanced Materials,Seoul National University,Seoul 08826,South Korea;Institute for Materials Science,University of Stuttgart,Pfaffenwaldring 55,Stuttgart 70569,Germany;Computational Materials Design,Max-Planck-Institut für Eisenforschung GmbH,Max-Planck-Strabe 1,Düisseldorf 40237,Germany;Research Center for Computational Design of Advanced Functional Materials(CD-Fmat),National Institute of Advanced Industrial Science and Technology(AIST),Tsukuba,Ibaraki 305-8568,Japan;Department of Materials Science and Engineering,Delft University of Technology,Mekelweg,2,Delft 2628 CD,the Netherlands
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。