首站-论文投稿智能助手
典型文献
Improvement in oxidation resistance of Cantor alloy through microstructure tailoring
文献摘要:
A method of improving the oxidation resistance of Cantor alloy through microstructure tailoring was revealed. Samples with distinctive microstructures were achieved by different annealing treatments on the cold-rolled Cantor alloy. Oxidation test was then carried out on the various annealed samples at 800 °C for 24 h in air. The oxidation behavior was evaluated in terms of oxidation rate, surface and cross-section microstructure characterization. Although stratified oxide layers including outer Mn2O3 and inner Cr2O3 were observed in all the annealed samples, the thickness of Mn2O3 and Cr2O3 layers was different. Also, the samples exhibited different oxidation rates. The results indicate that the oxidation resistance of various annealed samples is closely related with grain size as well as twin density.
文献关键词:
作者姓名:
Bao-lin Pang;Man Wang;Yue-gang Shen;Xiao-li Xi;Zuo-ren Nie
作者机构:
Collaborative Innovation Center of Capital Resource-Recycling Material Technology,Faculty of Materials and Manufacturing,Beijing University of Technology,Beijing 100124,China;National Engineering Laboratory for Industrial Big-data Application Technology,Beijing University of Technology,Beijing 100124,China;Key Laboratory of Advanced Functional Materials,Ministry of Education,Beijing University of Technology,Beijing 100124,China
文献出处:
引用格式:
[1]Bao-lin Pang;Man Wang;Yue-gang Shen;Xiao-li Xi;Zuo-ren Nie-.Improvement in oxidation resistance of Cantor alloy through microstructure tailoring)[J].中国铸造,2022(06):503-510
A类:
B类:
Improvement,oxidation,resistance,Cantor,alloy,through,tailoring,method,improving,was,revealed,Samples,distinctive,microstructures,were,achieved,by,different,annealing,treatments,cold,rolled,Oxidation,test,then,carried,various,annealed,samples,air,behavior,evaluated,terms,surface,cross,section,characterization,Although,stratified,oxide,layers,including,outer,Mn2O3,inner,Cr2O3,observed,thickness,Also,exhibited,rates,results,indicate,that,closely,related,grain,size,well,twin,density
AB值:
0.545332
相似文献
Tailoring precipitation/properties and related mechanisms for a high-strength aluminum alloy plate via low-temperature retrogression and re-aging processes
L.G.Hou;H.Yu;Y.W.Wang;L.You;Z.B.He;C.M.Wu;D.G.Eskin;L.Katgerman;L.Z.Zhuang;J.S.Zhang-State Key Laboratory for Advanced Metals&Materials,University of Science&Technology Beijing,Beijing 100083,China;BCAST,Brunel University London,Kingston Lane,Uxbidge Middlesex UB8 3PH,United Kingdom;Nanjing Advanced Transportation Equipment New Technology Research Institute,Nanjing 211800,China;Institute of mineral resources,Chinese Academy of Geological Sciences,Beijing 100037,China;Tomsk State University,Tomsk,634050,Russian Federation;Katgerman Aluminium Technology,van Beuningenlaan 10,2334CC Leiden,NetherlandsDepartment of Materials Science and Engineering,Delft University of Technology,Mekelweg 2,2628CD Delft,the Netherlands
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
A superior strength-ductility synergy of Al0.1CrFeCoNi high-entropy alloy with fully recrystallized ultrafine grains and annealing twins
Jiahao Li;Kejie Lu;Xiaojun Zhao;Xinkai Ma;Fuguo Li;Hongbo Pan;Jieming Chen-Key Laboratory of Advanced Technologies of Materials,Ministry of Education,School of Materials Science and Engineering,Southwest Jiaotong University,Chengdu 610031,China;Shenzhen Institute of Southwest Jiaotong University,Shenzhen 518000,China;State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China;Anhui Province Key Laboratory of Metallurgical Engineering& Resources Recycling(Anhui University of Technology),243002 Maanshan,China;Luoyang Ship Material Research Institute,Luoyang 471023,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。