首站-论文投稿智能助手
典型文献
Morphologies of intermetallic compound phases in Sn-Cu and Sn-Co peritectic alloys during directional solidification
文献摘要:
The morphologies of intermetallic phases (IMCs) during directional solidification of the Sn-Cu (L+Cu3Sn→Cu6Sn5) and Sn-Co (L+CoSn→CoSn2) peritectic systems were analyzed. The primary Cu3Sn and peritectic Cu6Sn5 phases in Sn-Cu alloy are IMCs whose solubility ranges are narrow, while both the primary CoSn and peritectic CoSn2 phases in Sn-Co alloy are IMCs whose solubility ranges are nil in equilibrium condition. The experimental results before acid corrosion shows that the dendritic morphology of both the Cu6Sn5 and CoSn2 phases can be observed. The investigation on the local dendritic morphology after deep acid corrosion shows that these dendrites are composed of small sub-structures with faceted feature. Faceted growth of the primary Cu3Sn and CoSn phases is also confirmed, and a faceted to non-faceted transition in their morphologies is observed with increasing growth velocities. Further analysis shows that the dendritic morphology is formed in the solidified phases whose solubility range is larger during peritectic solidification.
文献关键词:
作者姓名:
Peng Peng;Jin-mian Yue;An-qiao Zhang;Jia-tai Wang;Jiang-lei Fan
作者机构:
School of Physics and Electronic Information Engineering,Qinghai Normal University,Xining 753000,China;School of Materials and Energy,Lanzhou University,Lanzhou 730000,China;Northwest Rare Metal Materials Research Institute,Shizuishan 753099,Ningxia,China;Shanxi Taigang Stainless Steel Co.,Ltd.,Taiyuan 030003,China;School of Mechanical and Electrical Engineering,Zhengzhou University of Light Industry,Zhengzhou 450000,China
文献出处:
引用格式:
[1]Peng Peng;Jin-mian Yue;An-qiao Zhang;Jia-tai Wang;Jiang-lei Fan-.Morphologies of intermetallic compound phases in Sn-Cu and Sn-Co peritectic alloys during directional solidification)[J].中国铸造,2022(05):411-418
A类:
L+Cu3Sn,L+CoSn,CoSn2,CoSn
B类:
Morphologies,intermetallic,compound,phases,peritectic,alloys,during,directional,solidification,morphologies,IMCs,Cu6Sn5,systems,were,analyzed,primary,are,whose,solubility,ranges,narrow,while,both,nil,equilibrium,condition,experimental,results,before,acid,corrosion,shows,that,dendritic,morphology,can,observed,investigation,local,after,deep,these,dendrites,composed,small,sub,structures,faceted,feature,Faceted,growth,also,confirmed,transition,their,increasing,velocities,Further,analysis,formed,solidified,larger
AB值:
0.386314
相似文献
Additive manufacturing of metals:Microstructure evolution and multistage control
Zhiyuan Liu;Dandan Zhao;Pei Wang;Ming Yan;Can Yang;Zhangwei Chen;Jian Lu;Zhaoping Lu-Additive Manufacturing Institute,College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China;Department of Materials Science and Engineering,Southern University of Science and Technology,Shenzhen 518055,China;Sino-German College of Intelligent Manufacturing,Shenzhen Technology University,Shenzhen 518118,China;CityU-Shenzhen Futian Research Institute,Shenzhen 518045,China;Hong Kong Branch of National Precious Metals Material Engineering Research Center(NPMM),City University of Hong Kong,Hong Kong,China;Beijing Advanced Innovation Center for Materials Genome Engineering,State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。