首站-论文投稿智能助手
典型文献
Theoretical and experimental studies on critical time delay of multi-DOF real-time hybrid simulation
文献摘要:
This paper aims to investigate the critical stability of a multi-degree-of-freedom (multi-DOF) real-time hybrid simulation (RTHS). First, the critical time-delay analysis models are developed using the continuous- and discrete-time root locus (RL) techniques, respectively. A bilinear transform is introduced into the first-order Padé approximation while conducting the discrete RL analysis. Based on this technique, the time delay can be explicitly used as the gain factor and thus the instability mechanism of the multi-DOF RTHS system can be analyzed. Subsequently, the critical time delays calculated by the continuous- and discrete-time RL techniques, respectively, are compared for a 2-DOF RTHS system. It is shown that assuming the RTHS system to be a continuous-time system will result in overestimating the critical time delay. Finally, theoretically calculated critical delays are demonstrated and validated by numerical simulation and a set of RTHS experiments. Parametric analysis provides a glimpse of the effects of time step, frequency and damping ratio in a performing partitioning scheme. The constructed analysis model proves to be useful for evaluating the critical time delay to predict stability and performance, therefore facilitating successful RTHS.
文献关键词:
作者姓名:
Lu Liqiao;Wang Jinting;Ding Hao;Zhu Fei
作者机构:
State Key Laboratory of Hydroscience and Engineering,Tsinghua University,Beijing 100084,China;China Huaneng Group Co.,Ltd.,Beijing 100031,China;Hisense Group Co.,Ltd.,Qingdao 266520,China
引用格式:
[1]Lu Liqiao;Wang Jinting;Ding Hao;Zhu Fei-.Theoretical and experimental studies on critical time delay of multi-DOF real-time hybrid simulation)[J].地震工程与工程振动(英文版),2022(01):117-134
A类:
RTHS,overestimating
B类:
Theoretical,experimental,studies,critical,multi,DOF,real,hybrid,simulation,This,paper,aims,investigate,degree,freedom,First,analysis,models,developed,using,continuous,discrete,root,locus,RL,techniques,respectively,bilinear,transform,introduced,into,first,order,Pad,approximation,while,conducting,Based,this,can,be,explicitly,used,gain,thus,instability,mechanism,system,analyzed,Subsequently,delays,calculated,by,compared,It,shown,that,assuming,will,result,Finally,theoretically,demonstrated,validated,numerical,set,experiments,Parametric,provides,glimpse,effects,step,frequency,damping,ratio,performing,partitioning,scheme,constructed,proves,useful,evaluating,predict,performance,therefore,facilitating,successful
AB值:
0.497242
相似文献
Debris flow simulation 2D(DFS 2D):Numerical modelling of debris flows and calibration of friction parameters
Minu Treesa Abraham;Neeelima Satyam;Biswajeet Pradhan;Hongling Tian-Department of Civil Engineering,Indian Institute of Technology Indore,Indore,India;Centre for Advanced Modelling and Geospatial Information Systems(CAMGIS),School of Civil and Environmental Engineering,Faculty of Engineering and Information Technology,University of Technology Sydney,Sydney,Australia;Center of Excellence for Climate Change Research,King Abdulaziz University,Jeddah,Saudi Arabia;Earth Observation Centre,Institute of Climate Change,University Kebangsaan Malaysia,Bangi,Malaysia;Key Laboratory of Mountain Hazards and Surface Process,Institute of Mountain Hazards and Environment,Chinese Academy of Sciences,Chengdu,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。