首站-论文投稿智能助手
典型文献
Modification of FCC slurry oil and deoiled asphalt for making high-grade paving asphalt
文献摘要:
With the rapid development of modern industry,high-grade paving asphalt is massively required to meet the demands for modern transportation.As one of additives,natural asphalt is indispensable since it can improve the performance of paving asphalt in all aspects.However,the application of non-renewable natural asphalt is increasingly restricted by its limited reserves.It is imperative to find alternative approaches to produce high-grade paving asphalt.Fluid catalytic cracking(FCC)slurry oil is an ideal soft component for producing paving asphalt due to its high content of aromatics and resins.However,its bad ageing resistance limits its application to only low-grade paving asphalt.In the present work,a novel approach for producing high-grade paving asphalt was investigated using chemically modified FCC slurry oil and deoiled asphalt(DOA).The FT-IR and NMR results showed that dehydrogenation and condensa-tion reaction occurred during the ageing process.From a series of aliphatic alcohols and aldehydes,pro-panal was selected as a proper modifier to improve the ageing resistance of FCC slurry oil.The propanal-modified slurry oil possessed more substituted aromatic units and less aromatic hydrogen atoms than other modified slurry oils,thus showing better ageing resistance.With the increase of length of aliphatic chains in modifier,the modified slurry oil contained more and longer alkyl substituent group on aromat-ics.Compared with the cross-linked oil(slurry oil modified by cross-linking agent),modified slurry oil possessed similar ageing resistance but higher flowing ability.Also,the effect of operation conditions on the kinematic viscosity of modified slurry oil were investigated.Blended with modified slurry oil,the penetration ratio of asphalt product increased from 53.7 to 66.2,which met the standard of 70#pav-ing asphalt.Both the microscopic observations and FT-IR results indicated that modification process effectively reduced the oxidation degree of asphalt product,thus increasing the ageing resistance.Consequently,with aid of this process,high-grade paving asphalt was readily produced from low value oil from downstream products of refinery,instead of the depleting natural asphalt.
文献关键词:
作者姓名:
Lingrui Cui;Jun Xu;Mannian Ren;Tao Li;Dianhua Liu;Fahai Cao
作者机构:
Large Industrial Reactor Engineering Research Center of Ministry of Education,East China University of Science and Technology,Shanghai 200237,China;Sinopec Luoyang Company,Luoyang 471003,China
引用格式:
[1]Lingrui Cui;Jun Xu;Mannian Ren;Tao Li;Dianhua Liu;Fahai Cao-.Modification of FCC slurry oil and deoiled asphalt for making high-grade paving asphalt)[J].中国化学工程学报(英文版),2022(04):300-309
A类:
deoiled,condensa,panal,propanal,aromat,70#pav,refinery
B类:
Modification,FCC,slurry,asphalt,making,grade,paving,With,rapid,development,modern,industry,massively,required,meet,demands,transportation,additives,natural,indispensable,since,can,improve,performance,aspects,However,application,renewable,increasingly,restricted,by,limited,reserves,It,imperative,find,alternative,approaches,Fluid,catalytic,cracking,ideal,soft,component,producing,due,content,aromatics,resins,bad,ageing,resistance,limits,only,In,present,work,novel,was,investigated,using,chemically,modified,DOA,FT,NMR,results,showed,that,dehydrogenation,reaction,occurred,during,process,From,series,aliphatic,alcohols,aldehydes,selected,proper,modifier,possessed,more,substituted,units,less,atoms,than,other,oils,thus,showing,better,length,chains,contained,longer,alkyl,substituent,group,Compared,cross,linked,linking,agent,similar,but,higher,flowing,ability,Also,operation,conditions,kinematic,viscosity,were,Blended,penetration,increased,from,which,met,standard,Both,microscopic,observations,indicated,modification,effectively,reduced,oxidation,degree,Consequently,aid,this,readily,produced,value,downstream,products,instead,depleting
AB值:
0.443297
相似文献
Silicone/graphene oxide co-cross-linked aerogels with wide-temperature mechanical flexibility,super-hydrophobicity and flame resistance for exceptional thermal insulation and oil/water separation
Zhao-Hui Zhang;Zuan-Yu Chen;Yi-Hao Tang;Yu-Tong Li;Dequan Ma;Guo-Dong Zhang;Rabah Boukherroub;Cheng-Fei Cao;Li-Xiu Gong;Pingan Song;Kun Cao;Long-Cheng Tang-College of Material,Chemistry and Chemical Engineering,Key Laboratory of Organosilicon Chemistry and Material Technology of MoE,Hangzhou Normal University,Hangzhou,311121,China;Univ.Lille,CNRS,Centrale Lille,Univ.Polytechnique Hauts-de-France,UMR 8520-IEMN,F-59000 Lille,France;China Helicopter Research and Development Institute,Jingdezhen.333001,China;Tianjin Helicopter Co.,Ltd.,Tianjin,300308,China;Centre for Future Materials,University of Southern Queensland.Springfield Campus,QLD,4300,Australia;State Key Laboratory of Chemical Engineering,College of Chemical and Biological Engineering,Zhejiang University,Hangzhou,310027,China
Tailoring precipitation/properties and related mechanisms for a high-strength aluminum alloy plate via low-temperature retrogression and re-aging processes
L.G.Hou;H.Yu;Y.W.Wang;L.You;Z.B.He;C.M.Wu;D.G.Eskin;L.Katgerman;L.Z.Zhuang;J.S.Zhang-State Key Laboratory for Advanced Metals&Materials,University of Science&Technology Beijing,Beijing 100083,China;BCAST,Brunel University London,Kingston Lane,Uxbidge Middlesex UB8 3PH,United Kingdom;Nanjing Advanced Transportation Equipment New Technology Research Institute,Nanjing 211800,China;Institute of mineral resources,Chinese Academy of Geological Sciences,Beijing 100037,China;Tomsk State University,Tomsk,634050,Russian Federation;Katgerman Aluminium Technology,van Beuningenlaan 10,2334CC Leiden,NetherlandsDepartment of Materials Science and Engineering,Delft University of Technology,Mekelweg 2,2628CD Delft,the Netherlands
Medium-entropy(Me,Ti)0.1(Zr,Hf,Ce)0.9O2(Me=Y and Ta):Promising thermal barrier materials for high-temperature thermal radiation shielding and CMAS blocking
Shuaihang Qiu;Huimin Xiang;Fu-Zhi Dai;Hailong Wang;Muzhang Huang;Chunlei Wan;Qing Meng;Jiangtao Li;Xiaohui Wang;Yanchun Zhou-Science and Technology on Advanced Functional Composite Laboratory,Aerospace Research Institute of Materials and Processing Technology,Beijing 100076,China;State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology,Wuhan 430070,China;School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450001,China;State Key Lab of New Ceramics and Fine Processing,School of Materials Science and Engineering,Tsinghua University,Beijing 100084,China;Technical Institute of Physics and Chemistry,Chinese Academy of Sciences,Beijing 100190,China;Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China
Life cycle assessment and economic analysis of HFC-134a production from natural gas compared with oil-based and coal-based production
Suisui Zhang;Gang Li;Boyang Bai;Luyao Qiang;Xiaoxun Ma;Jingying Li-School of Chemical Engineering,Northwest University,Xi'an 710069,China;Chemical Engineering Research Center of the Ministry of Education(MOE)for Advanced Use Technology of Shanbei Energy,Xi'an 710069,China;Shaanxi Research Center of Engineering Technology for Clean Coal Conversion,Xi'an 710069,China;Collaborative Innovation Center for Development of Energy and Chemical Industry in Northern Shaanxi,Xi'an 710069,China;International Scientific and Technological Cooperation Base of the Ministry of Science and Technology(MOST)for Clean Utilization of Hydrocarbon Resources,Xi'an 710069,China;Longdong University,Qingyang 745000,China
Self-ball milling strategy to construct high-entropy oxide coated LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance
Kai YUAN;Tianzhe TU;Chao SHEN;Lin ZHOU;Jixuan LIU;Jing LI;Keyu XIE;Guojun ZHANG-State Key Laboratory of Solidification Processing,Center for Nano Energy Materials,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China;State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,Institute of Functional Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China;Research&Development Institute of Northwestern Polytechnical University in Shenzhen,Northwestern Polytechnical University,Shenzhen 518057,China;State Key Laboratory of Environment-friendly Energy Materials,School of Materials Science and Engineering,Southwest University of Science and Technology,Mianyang 621010,China
Progress and key challenges in catalytic combustion of lean methane
Xiangbo Feng;Lei Jiang;Danyang Li;Shaopeng Tian;Xing Zhu;Hua Wang;Chi He;Kongzhai Li-Xi'an Key Laboratory of Advanced Photoelectronics Materials and Energy Conversion Device,School of Science,Xijing University,Xi'an 710123,Shaanxi,China;State Key Laboratory of Multiphase Flow in Power Engineering,School of Energy and Power Engineering,Xi'an Jiaotong University,Xi'an 710049,Shaanxi,China;State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization,Kunming University of Science and Technology,Kunming 650093,Yunnan,China;Faculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming 650093,Yunnan,China;National Engineering Laboratory for VOCs Pollution Control Material&Technology,University of Chinese Academy of Sciences,Beijing 101408,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。