FAILED
首站-论文投稿智能助手
典型文献
Effect of Y2O3 Addition on Preparation and Properties of β-SiAlON Reticular Porous Ceramic Filters
文献摘要:
β-SiAlON reticular porous ceramics(Si6-ZAlzOzN8-Z,Z=2)were prepared with α-Al2O3,AIN and Si as raw materials and Y2O3 as the sintering aid by the foam impregnation method.The influence of the Y2O3 addition(0,3%,6%and 9%,by mass)on the microstructure and the properties of the samples was studied.The results show that the Y2O3 addition is conductive to the sintering of samples and the growth of grains.The sample added with 6%Y2O3 has the optimal properties:the apparent porosity of 82.9%,the bulk density of 0.53 g·cm-3,the cold compressive strength of 1.97 MPa,and the residual cold compressive strength of 1.68 MPa after oxidation,which can be used as porous ceramic filters.
文献关键词:
作者姓名:
GAO Jinxing;XU Lingling;LI Liya;MU Jinghua;Li Xiaokai;XU Enxia;GUO Donghui;MENG Dekang;ZHOU Gaofeng;CHEN Shoujie
作者机构:
School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450052,China;Henan Xuantong New Materials Technology Co.,Ltd.,Zhengzhou 450000,China;Henan Tongyu Metallurgy Materials Group Co.,Ltd.,Nanyang 473000,China
引用格式:
[1]GAO Jinxing;XU Lingling;LI Liya;MU Jinghua;Li Xiaokai;XU Enxia;GUO Donghui;MENG Dekang;ZHOU Gaofeng;CHEN Shoujie-.Effect of Y2O3 Addition on Preparation and Properties of β-SiAlON Reticular Porous Ceramic Filters)[J].中国耐火材料(英文版),2022(04):28-33
A类:
Reticular,ZAlzOzN8
B类:
Effect,Y2O3,Addition,Preparation,Properties,SiAlON,Porous,Ceramic,Filters,reticular,porous,ceramics,Si6,were,prepared,Al2O3,AIN,raw,materials,sintering,aid,by,foam,impregnation,method,influence,addition,mass,microstructure,properties,samples,was,studied,results,show,that,is,conductive,growth,grains,added,has,optimal,apparent,porosity,bulk,density,cold,compressive,strength,residual,after,oxidation,which,can,be,used,filters
AB值:
0.593995
相似文献
Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu:Effect of Heat Treatment on Microstructure Evolution,Mechanical Properties and Wear Resistance
Pei Wang;Sijie Yu;Jaskarn Shergill;Anil Chaubey;Jurgen Eckert;Konda Gokuldoss Prashanth;Sergio Scudino-Additive Manufacturing Institute,College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China;Institute for Complex Materials,IFW Dresden,Helmholtzstra?e 20,01069 Dresden,Germany;Institute of Minerals and Materials Technology(IMMT),Bhubaneshwar 751013,Orissa,India;Erich Schmid Institute of Materials Science,Austrian Academy of Sciences,Jahnstra?e 12,8700 Leoben,Austria;Department of Materials Science,Chair of Materials Physics,Montanuniversit?t Leoben,Jahnstra?e 12,8700 Leoben,Austria;Adjunct With National University of Science and Technology ?MISiS?,Leninsky Prosp.,4,119049 Moscow,Russia;Department of Mechanical and Industrial Engineering,Tallinn University of Technology,Ehitajete tee 5,19086 Tallinn,Estonia;CBCMT,School of Mechanical Engineering,Vellore Institute of Technology,Vellore,Tamil Nadu 632 014,India
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。