首站-论文投稿智能助手
典型文献
Characteristics of flow and liquid distribution in a gas-liquid vortex separator with multi spiral arms
文献摘要:
Fischer-Tropsch(F-T)synthesis is an important route to achieve the clean fuel production.The perfor-mance of gas-liquid separation equipment involving in the progressive condensation and separation of light and heavy hydrocarbons in the oil-gas products has become a bottleneck restricting the smooth operation of the F-T process.In order to remove the bottleneck,a gas-liquid vortex separator with simple structure,low pressure drop and big separation capacity was designed to achieve the efficient separation between gas and droplets for a long period.The RSM(Reynolds Stress Model)and DPM(Discrete Phase Method)are employed to simulate the flow characteristics and liquid distribution in the separator.The results show that the separation efficiency is influenced by the flow field and liquid phase concentration in the annular zone.The transverse vortex at the top of spiral arm entrains the droplets with small diam-eter into the upper annular zone.The entrained droplets rotate upward at an angle of about 37.4°.The screw pitch between neighbor liquid threads is about 0.3 m.There is a top liquid ring in the top of annular zone,where the higher is the liquid phase concentration,the lower is the separation efficiency.It is found that by changing the operating condition and the annular zone height the vortex can be strengthened but not enlarged by the inlet velocity.The screw pitch is not affected by both inlet velocity and annular zone height.The liquid phase concentration in the top liquid ring decreases with both the increases of inlet velocity and annular zone height.The total pressure drop is almost not affected by the annular zone height but is obviously affected by the inlet velocity.When the height of annular zone is more than 940 mm,the separation efficiency is not changed.Therefore,the annular zone height of 940 mm is thought to be the most economical design.
文献关键词:
作者姓名:
Xiuying Yao;Peng Zuo;Chunxi Lu;Chenglin E;Mengxi Liu
作者机构:
State Key Laboratory of Heavy Oil Processing,China University of Petroleum,Beijing 102249,China;Research Institute of Experimental and Detection,Xinjiang Oilfield Company,PetroChina,Karamay,Xinjiang 834000,China
引用格式:
[1]Xiuying Yao;Peng Zuo;Chunxi Lu;Chenglin E;Mengxi Liu-.Characteristics of flow and liquid distribution in a gas-liquid vortex separator with multi spiral arms)[J].颗粒学报(英文版),2022(09):101-113
A类:
entrains
B类:
Characteristics,flow,liquid,distribution,gas,vortex,separator,multi,spiral,arms,Fischer,Tropsch,synthesis,important,route,achieve,clean,fuel,production,perfor,mance,separation,equipment,involving,progressive,condensation,light,heavy,hydrocarbons,oil,products,become,bottleneck,restricting,smooth,operation,process,In,order,remove,simple,structure,pressure,big,capacity,was,designed,efficient,between,droplets,long,period,RSM,Reynolds,Stress,Model,DPM,Discrete,Phase,Method,are,employed,simulate,characteristics,results,show,that,efficiency,influenced,by,field,phase,concentration,annular,zone,transverse,top,small,diam,eter,into,upper,entrained,rotate,upward,angle,about,screw,pitch,neighbor,threads,ring,where,higher,lower,It,found,changing,operating,condition,height,can,strengthened,not,enlarged,inlet,velocity,affected,both,decreases,increases,total,almost,obviously,When,more,than,changed,Therefore,thought,economical
AB值:
0.452644
相似文献
Novel method for improving iron recovery from electric arc furnace slag:on-site hot modification
Xiang Lu;Xiao-li Huang;Ru-fei Wei;Wen Chen;Da-qiang Cang;Fei-hua Yang;Chun-lei Pu-Changsha Research Institute of Mining&Metallurgy Co.,Ltd.,Changsha 410012,Hunan,China;School of Metallurgy and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;Technological Institute of Development and Strategy Studies,Panzhihua 617000,Sichuan,China;School of Metallurgical Engineering,Anhui University of Technology,Ma'anshan 243000,Anhui,China;State Key Laboratory of Solid Waste Reuse for Building Materials(SKL-SWR),Beijing Building Materials Academy of Sciences Research(BBMA),Beijing 100083,China;Iron and Steel Technology Research Institute,HUATIAN Engineering&Technology Corporation,MCC,Nanjing 210019,Jiangsu,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。