FAILED
首站-论文投稿智能助手
典型文献
Positive Strain Rate Sensitivity and Deformation Behavior of a Fe-29Mn-3Al-3SiTWIP Steel
文献摘要:
The Fe-29Mn-3Al-3Si twin-induced plasticity(TWIP)steel is used to conduct quasi-static compression and dynamic impact deformation with strain rates ranging from 8.3×10-4 to 3800 s-1.The microstructures and properties of deformed samples under different strain rates were investigated comparatively.These results show that positive strain rate sensitivity was observed with the increase in strain rates and that there was a significant difference in strain rate sensitivity factor(m)between quasi-static compression(m=0.029)and dynamic impact deformation(m=0.190).Compared to the quasi-static compression,the dynamic impact deformation exhibited higher yield strength.Microstructural examination reveals that the primary twins were frequently found during the quasi-static compression process,and the secondary twins were rarely observed.However,the secondary and multi-fold deformation twins were florescent in the dynamic impact samples.At the initial stage of dynamic impact deformation,partial dislocations and staking faults on multiple conjugate{111}planes were simultaneously activated and produced a large number of Lomer-Cottrell dislocations,resulting in a large increase in yield strength during dynamic impact.
文献关键词:
作者姓名:
Shucheng Shen;Cuilan Wu;Pan Xie;Yuanrui Liu
作者机构:
Center of High Resolution Electron Microscopy,College of Materials Science and Engineering,Hunan University,Changsha 410082,China
引用格式:
[1]Shucheng Shen;Cuilan Wu;Pan Xie;Yuanrui Liu-.Positive Strain Rate Sensitivity and Deformation Behavior of a Fe-29Mn-3Al-3SiTWIP Steel)[J].金属学报(英文版),2022(11):1825-1836
A类:
29Mn,3SiTWIP,florescent,staking
B类:
Positive,Strain,Rate,Sensitivity,Deformation,Behavior,3Al,Steel,induced,plasticity,steel,used,conduct,quasi,static,compression,dynamic,impact,deformation,strain,rates,ranging,from,microstructures,properties,deformed,samples,under,different,were,investigated,comparatively,These,results,show,that,positive,sensitivity,was,observed,increase,there,significant,difference,between,Compared,exhibited,higher,yield,strength,Microstructural,examination,reveals,primary,twins,frequently,found,during,process,secondary,rarely,However,fold,At,initial,stage,partial,dislocations,faults,multiple,conjugate,planes,simultaneously,activated,produced,large,number,Lomer,Cottrell,resulting
AB值:
0.495798
相似文献
Effect of solid-solution strengthening on deformation mechanisms and strain hardening in medium-entropy V1-xCrxCoNi alloys
Hyun Chung;Dae Woong Kim;Woo Jin Cho;Heung Nam Han;Yuji Ikeda;Shoji Ishibashi;Fritz K?rmann;Seok Su Sohn-Department of Materials Science and Engineering,Korea University,Seoul 02841,South Korea;Center for High Entropy Alloys,Pohang University of Science and Technology,Pohang 37673,South Korea;Department of Materials Science and Engineering and Research Institute of Advanced Materials,Seoul National University,Seoul 08826,South Korea;Institute for Materials Science,University of Stuttgart,Pfaffenwaldring 55,Stuttgart 70569,Germany;Computational Materials Design,Max-Planck-Institut für Eisenforschung GmbH,Max-Planck-Strabe 1,Düisseldorf 40237,Germany;Research Center for Computational Design of Advanced Functional Materials(CD-Fmat),National Institute of Advanced Industrial Science and Technology(AIST),Tsukuba,Ibaraki 305-8568,Japan;Department of Materials Science and Engineering,Delft University of Technology,Mekelweg,2,Delft 2628 CD,the Netherlands
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。