首站-论文投稿智能助手
典型文献
X-ray tomography analysis of aluminum alloy powder compaction
文献摘要:
Aluminum alloy green compacts obtained by single-action compaction in lubricated and unlubricated dies were investigated by X-ray tomography.For the pur-pose of obtaining the relationship between the density of green compact and the gray value of reconstructed images,linear fitting was performed.The results show that these data have excellent linear relationship.Then,a new method for analysis of compaction process was presented in this paper.Detailed quantitative analysis of the density and compressive pressure distribution in green compacts was performed.The compressive pressure transmitted ratio and friction index were also discussed.It is found that the lubricated die wall has better effects on the density homogeneity at lower applied compressive pressure.Dur-ing compaction process,the densification of powder par-ticles in the die mainly occurs in the lower part of the green compact and the factor which mainly influences the friction between die wall and green compact is the applied com-pressive pressure.
文献关键词:
作者姓名:
Shi-Di Yang;Rui-Jie Zhang;Xuan-Hui Qu
作者机构:
State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China;School of Material Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China
引用格式:
[1]Shi-Di Yang;Rui-Jie Zhang;Xuan-Hui Qu-.X-ray tomography analysis of aluminum alloy powder compaction)[J].稀有金属(英文版),2022(09):3244-3250
A类:
compacts,unlubricated
B类:
tomography,analysis,aluminum,alloy,powder,compaction,Aluminum,green,obtained,by,single,dies,were,investigated,For,pur,pose,obtaining,relationship,between,density,gray,value,reconstructed,images,linear,fitting,was,performed,results,show,that,these,data,have,excellent,Then,new,method,process,presented,this,paper,Detailed,quantitative,compressive,pressure,distribution,transmitted,ratio,friction,also,discussed,It,found,wall,has,better,effects,homogeneity,lower,applied,Dur,densification,ticles,mainly,occurs,part,which,influences
AB值:
0.475045
相似文献
Continuous chemical redistribution following amorphous-to-crystalline structural ordering in a Zr-Cu-Al bulk metallic glass
Xuelian Wu;Si Lan;Xiyang Li;Ming Yang;Zhenduo Wu;Xiaoya Wei;Haiyan He;Muhammad Naeem;Jie Zhou;Zhaoping Lu;Elliot Paul Gilbert;Dong Ma;Xun-Li Wang-Department of Physics,City University of Hong Kong,Hong Kong,China;Herbert Gleiter Institute of Nanoscience,School of Materials Science and Engineering,Nanjing University of Science and Technology,Nanjing 210094,China;Beijing National Laboratory for Condensed Matter Physics,Institute of Physics,Chinese Academy of Sciences,Beijing 100190,China;Quantum Matter Institute,University of British Columbia,Vancouver,British Columbia V6T 1Z4,Canada;Neutron Sciences Platform,Songshan Lake Materials Laboratory,Dongguan 523808,China;Center for Neutron Scattering and Applied Physics,City University of Hong Kong Dongguan Research Institute,Dongguan 523000,China;State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China;Australian Centre for Neutron Scattering,Australian Nuclear Science and Technology Organisation,Lucas Heights,New South Wales 2234,Australia;City University of Hong Kong Shenzhen Research Institute,Shenzhen 518057,China
Additive manufacturing of a Co-Cr-W alloy by selective laser melting:In-situ oxidation,precipitation and the corresponding strengthening effects
Kefeng Li;Zhi Wang;Kaikai Song;Khashayar Khanlari;Xu-Sheng Yang;Qi Shi;Xin Liu;Xinhua Mao-Institute of New Materials,Guangdong Academy of Sciences,Guangzhou 510650,China;National Engineering Research Center of Powder Metallurgy of Titanium and Rare Metals,Guangzhou 510650,China;Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou 510641,China;School of Mechanical,Electrical and Information Engineering,Shandong University,Weihai 264209,China;Advanced Manufacturing Technology Research Center,Department of Industrial and Systems Engineering,The Hong Kong Polytechnic University,Hung Hom,Kowloon,Hong Kong,China;Hong Kong Polytechnic University Shenzhen Research Institute,Shenzhen 518000,China
Microstructure evolution and deformation mechanism of α+β dual-phase Ti-xNb-yTa-2Zr alloys with high performance
Ting Zhang;Daixiu Wei;Eryi Lu;Wen Wang;Kuaishe Wang;Xiaoqing Li;Lai-Chang Zhang;Hidemi Kato;Weijie Lu;Liqiang Wang-State Key Laboratory of Metal Matrix Composites,School of Material Science and Engineering,Shanghai Jiao Tong University,Shanghai,200240,China;School of Metallurgical Engineering,Xi'an University of Architecture and Technology,Xi'an,710055,China;Institute for Materials Research,Tohoku University,2-1-1 Katahira,Sendai,Miyagi,980-8577,Japan;Department of Stomatology,Renji Hospital,School of Medicine,Shanghai Jiao Tong University,Shanghai,200127,China;Department of Materials Science and Engineering,KTH-Royal Institute of Technology,10044,Stockholm,Sweden;School of Engineering,Edith Cowan University,270 Joondalup Drive,Joondalup,Perth,WA 6027,Australia
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。