首站-论文投稿智能助手
典型文献
Effect of undercut on the lower bound stability of vertical rock escarpment using finite element and power cone programming
文献摘要:
In the present study,the stability of a vertical rock escarpment is determined by considering the influence of undercut.Lower bound finite element limit analysis in association with Power Cone Programming(PCP)is applied to incorporate the failure of rock mass with the help of the Generalized Hoek-Brown yield criterion.The change in stability due to the presence of undercut is expressed in terms of a non-dimensional stability number(σci/γH).The variations of the magnitude of σci/γH are presented as design charts by considering the different magnitudes of undercut offset(H/vu and wu/vu)from the vertical edge and different magnitudes of Hoek-Brown rock mass strength parameters(Geological Strength Index(GSI),rock parameter(mi,),Disturbance factor(D)).The obtained results indicate that undercut can cause a severe stability problem in rock mass having poor strength.With the help of regression analysis of the computed results,a simplified design equation is proposed for obtaining σci/γH.By performing sensitivity analysis for an undisturbed vertical rock escarpment,we have found that the undercut height ratio(H/vu)is the most sensitive parameter followed by GSI,undercut shape ratio(wu/vu,and mi.The developed design equation as well as design charts can be useful for practicing engineers to determine the stability of the vertical rock escarpment in the presence of undercut.Failure patterns are also presented to understand type of failure and extent of plastic state during collapse.
文献关键词:
作者姓名:
Shuvankar DAS;Debarghya CHAKRABORTY
作者机构:
Department of Civil Engineering,Indian Institute of Technology Kharagpur,West Bengal 721302,India
引用格式:
[1]Shuvankar DAS;Debarghya CHAKRABORTY-.Effect of undercut on the lower bound stability of vertical rock escarpment using finite element and power cone programming)[J].结构与土木工程前沿,2022(08):1040-1055
A类:
escarpment
B类:
Effect,undercut,lower,bound,stability,vertical,rock,using,finite,element,power,cone,programming,study,determined,by,considering,influence,Lower,limit,analysis,association,Power,Cone,Programming,PCP,applied,incorporate,failure,mass,help,Generalized,Hoek,Brown,yield,criterion,change,due,presence,expressed,terms,dimensional,number,variations,are,presented,design,charts,different,magnitudes,offset,vu,wu,from,edge,strength,parameters,Geological,Strength,Index,GSI,Disturbance,obtained,results,indicate,that,can,cause,severe,problem,having,poor,With,regression,computed,simplified,equation,proposed,obtaining,By,performing,sensitivity,undisturbed,have,found,height,ratio,most,sensitive,followed,shape,developed,well,useful,practicing,engineers,Failure,patterns,also,understand,type,extent,plastic,state,during,collapse
AB值:
0.468466
相似文献
Mechanical behaviours of sandstone containing intersecting fissures under uniaxial compression
Fei Xiong;Xinrong Liu;Xiaohan Zhou;Guangyi Lin;Dongshuang Liu;Yafeng Han;Bin Xu;Chunmei He;Zijuan Wang-School of Civil Engineering,Chongqing University,Chongqing,400045,China;State Key Laboratory of Coal Mine Disaster Dynamics and Control,Chongqing University,Chongqing,400044,China;National Joint Engineering Research Center of Geohazards Prevention in the Reservoir Areas,Chongqing University,Chongqing,400045,China;State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology,Xuzhou,221116,China;College of Architectural Engineering,Neijiang Normal University,Neijiang,641100,China;School of Management Science and Engineering,Chongqing Technology and Business University,Chongqing,400067,China
Debris flow simulation 2D(DFS 2D):Numerical modelling of debris flows and calibration of friction parameters
Minu Treesa Abraham;Neeelima Satyam;Biswajeet Pradhan;Hongling Tian-Department of Civil Engineering,Indian Institute of Technology Indore,Indore,India;Centre for Advanced Modelling and Geospatial Information Systems(CAMGIS),School of Civil and Environmental Engineering,Faculty of Engineering and Information Technology,University of Technology Sydney,Sydney,Australia;Center of Excellence for Climate Change Research,King Abdulaziz University,Jeddah,Saudi Arabia;Earth Observation Centre,Institute of Climate Change,University Kebangsaan Malaysia,Bangi,Malaysia;Key Laboratory of Mountain Hazards and Surface Process,Institute of Mountain Hazards and Environment,Chinese Academy of Sciences,Chengdu,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。