典型文献
Practice and numerical simulation of ingot solidification for high-performance homogeneous steel
文献摘要：
A 40 t EAF+LF+VD→mold casting 20 t ingot→ hot forging and heating process is employed to produce high-performance homogeneous steel.The solidification process of the 20 t ingot for the high-performance homogeneous steel was simulated by ProCAST casting simulation software.The distribution area and degree of segregation or porosity defects in the longitudinal section of the ingot were analyzed.The reason for the defect formation in the large-scale ingot for forging material was determined,which can be used as a guide for production.The results show that controlling the superheat of die casting and adding a riser heating agent improve ingot quality for forging high-performance homogeneous steel and that flaw detection defects are effectively controlled after forging.
文献关键词：
中图分类号：
作者姓名：
ZHANG Hao;JIANG Chengbin
作者机构：
Baowu Special Metallurgy Co.,Ltd.,Shanghai 200940,China
文献出处：
引用格式：
[1]ZHANG Hao;JIANG Chengbin-.Practice and numerical simulation of ingot solidification for high-performance homogeneous steel)[J].宝钢技术研究（英文版）,2022(02):42-47
A类：
EAF+LF+VD
B类：
Practice,numerical,simulation,ingot,solidification,high,performance,homogeneous,steel,mold,casting,hot,forging,heating,process,employed,produce,was,simulated,by,ProCAST,software,distribution,area,degree,segregation,porosity,defects,longitudinal,section,were,analyzed,reason,formation,large,scale,material,determined,which,can,be,used,guide,production,results,show,that,controlling,superheat,die,adding,riser,agent,improve,quality,flaw,detection,effectively,controlled,after
AB值：
0.532072
相似文献
机标中图分类号，由域田数据科技根据网络公开资料自动分析生成，仅供学习研究参考。
