首站-论文投稿智能助手
典型文献
Analysis of temporal and spatial distribution characteristics of ammonium chloride smoke particles in confined spaces
文献摘要:
In response to the demand for short-range detection of anti-smoke environment interference by laser fuzes,this study proposes a smoke environment simulation of non-uniform continuous point source diffusion and investigates an experimental laboratory smoke environment using an ammonium chloride smoke agent.The particle size distribution,composition,and mass flow distribution of the smoke were studied.Based on a discrete phase model and a k-ε turbulence model,a numerical simulation was developed to model the smoke generation and diffusion processes of the smoke agent in a confined space.The temporal and spatial distribution characteristics of the smoke mass concentration,velocity,and temperature in the space after smoke generation were analyzed,and the motion law governing the smoke diffusion throughout the entire space was summarized.Combined with the experimental veri-fication of the smoke environment laboratory,the results showed that the smoke plume changed from fan-shaped to umbrella-shaped during smoke generation,and then continued to spread around.Meanwhile,the mass concentration of smoke in the space decreased from the middle outward;the changes in temperature and velocity were small and stable.In the diffusion stage(after 900 s),the mass concentration of smoke above 0.8 m was relatively uniform across an area of smoke that was 12 m thick.The concentration decreased over time,following a consistent decreasing trend,and the attenuation was negligible in a very short time.Therefore,this system was suitable for conducting experimental research on laser fuzes in a smoke environment.Owing to the stability of the equipment and facilities,the setup could reproduce the same experimental smoke environment by artificially controlling the smoke emission of the smoke agent.Overall,this work provides a theoretical reference for subsequent research efforts regarding the construction of uniform smoke environments and evaluating laser transmission characteristics in smoky environments.
文献关键词:
作者姓名:
Chen-youshi Xu;Bing-ting Zha;Jia-qian Bao;He Zhang;Hong-xia Li
作者机构:
ZNDY of Ministerial Key Laboratory,Nanjing University of Science and Technology,Jiangsu,Nanjing,210094,China
文献出处:
引用格式:
[1]Chen-youshi Xu;Bing-ting Zha;Jia-qian Bao;He Zhang;Hong-xia Li-.Analysis of temporal and spatial distribution characteristics of ammonium chloride smoke particles in confined spaces)[J].防务技术,2022(07):1269-1280
A类:
fuzes,smoky
B类:
Analysis,temporal,spatial,distribution,characteristics,ammonium,chloride,smoke,particles,confined,spaces,In,response,demand,short,range,detection,anti,interference,by,laser,this,study,proposes,simulation,uniform,continuous,point,source,diffusion,investigates,experimental,laboratory,using,agent,size,composition,mass,flow,were,studied,Based,discrete,phase,model,turbulence,numerical,was,developed,generation,processes,concentration,velocity,temperature,after,analyzed,motion,law,governing,throughout,entire,summarized,Combined,veri,fication,results,showed,that,plume,changed,from,fan,shaped,umbrella,during,then,continued,spread,around,Meanwhile,decreased,middle,outward,changes,small,stable,stage,above,relatively,across,area,thick,following,consistent,decreasing,trend,attenuation,negligible,very,Therefore,system,suitable,conducting,research,Owing,stability,equipment,facilities,setup,could,reproduce,same,artificially,controlling,emission,Overall,work,provides,theoretical,reference,subsequent,efforts,regarding,construction,environments,evaluating,transmission
AB值:
0.480683
相似文献
Effectiveness of coal mine dust control:A new technique for preparation and efficacy of self-adaptive microcapsule suppressant
Bo Ren;Liang Yuan;Gang Zhou;Shuailong Li;Qunzhi Meng;Kai Wang;Bingyou Jiang;Guofeng Yu-School of Emergency Management and Safety Engineering,China University of Mining and Technology-Beijing,Beijing 100083,China;State Key Laboratory of Deep Coal Mining&Environment Protection,Huainan Mining Group Co.,LTD.,Huainan 232001,China;Key Laboratory of Industrial Dust Control and Occupational Health,Ministry of Education,Anhui University of Science and Technology,Huainan 232001,China;College of Safety and Environmental Engineering,Shandong University of Science and Technology,Qingdao 266590,China;Department of Civil and Environmental Engineering,University of Alberta,Edmonton T6G 2R3,Canada
Experimental and numerical investigation into the non-explosive excavation of tunnels
Quan Zhang;Zhigang Tao;Chun Yang;Shan Guo;Manchao He;Chongyuan Zhang;Huiya Niu;Chao Wang;Shen Wang-School of Mines,China University of Mining and Technology,Xuzhou,Jiangsu,221116,China;State Key Laboratory of Geomechanics and Deep Underground Engineering,China University of Mining and Technology,Beijing,100083,China;School of Resources and Safety Engineering,Central South University,Changsha,410083,China;Department of Mining and Materials Engineering,McGill University,Montreal,QC,H3A 0E8,Canada;Institute of Geomechanics,Chinese Academy of Geological Sciences,Beijing,100081,China;College of Environmental Science and Engineering,Ocean University of China,Qingdao,266100,China;School of Energy Science and Engineering,Henan Polytechnic University,Jiaozuo,454003,China
Surface decoration of Halloysite nanotubes with POSS for fire-safe thermoplastic polyurethane nanocomposites
Wei Wu;Wanjing Zhao;Xianjing Gong;Qijun Sun;Xianwu Cao;Yujun Su;Bin Yu;Robert K.Y.Li;Roy A.L.Vellaisamy-Department of Materials Science and Engineering,City University of Hong Kong,Tat Chee Avenue,Kowloon,Hong Kong SAR,China;National Engineering Research Center of Novel Equipment for Polymer Processing,Key Laboratory of Polymer Processing Engineering of Ministry of Education,Guangdong Provincial Key Laboratory of Technique and Equipment for Macromolecular Advanced Manufacturing,School of Mechani?al and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;National-certified Enterprise Technology Center,Kingfa Science and Technology Co.Ltd.,Guangzhou 510663,China;Centre for Future Materials,University of Southern Queensland,Toowoomba,Queensland,Australia;James Watt School of Engineering,University of Glasgow,Glasgow G12 8QQ United Kingdom
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。