首站-论文投稿智能助手
典型文献
A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation
文献摘要:
The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.
文献关键词:
作者姓名:
Jie Liu;Xi Chen;Zhong-hua Du
作者机构:
Nanjing Vocational University of Industry Technology,Nanjing,210023,China;Nanjing University of Science and Technology,Nanjing,210094,China
文献出处:
引用格式:
[1]Jie Liu;Xi Chen;Zhong-hua Du-.A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation)[J].防务技术,2022(01):148-157
A类:
5was
B类:
study,surface,overpressure,distribution,formation,double,curvature,liner,under,two,point,initiation,mechanism,EFP,explosively,projectile,using,effect,generated,by,regular,oblique,reflection,investigated,this,paper,Based,detonation,wave,propagation,theory,change,incident,angle,collision,different,positions,area,were,calculated,Three,dimensional,numerical,simulations,process,well,ability,penetrate,45#,steel,performed,LS,DYNA,software,locity,penetration,forming,assessed,via,experiments,ray,photographs,experimental,results,coincides,those,Results,indicate,that,controlled,acting,setting,mensions,unit,charge,maintaining,region,more,than,times,CJ,when,approached,critical,distance,from,midline,boundary,within,which,greater,approximately,respectively,It,noted,gradient,caused,turn,inside,out,middle,head,close,tails,depth,into,target,exceeded,there,radial,expansion,between,EFE,increasing,resistance,Therefore,structural,size,can,further,optimized,reduce,increase
AB值:
0.465653
相似文献
Experimental and numerical investigation into the non-explosive excavation of tunnels
Quan Zhang;Zhigang Tao;Chun Yang;Shan Guo;Manchao He;Chongyuan Zhang;Huiya Niu;Chao Wang;Shen Wang-School of Mines,China University of Mining and Technology,Xuzhou,Jiangsu,221116,China;State Key Laboratory of Geomechanics and Deep Underground Engineering,China University of Mining and Technology,Beijing,100083,China;School of Resources and Safety Engineering,Central South University,Changsha,410083,China;Department of Mining and Materials Engineering,McGill University,Montreal,QC,H3A 0E8,Canada;Institute of Geomechanics,Chinese Academy of Geological Sciences,Beijing,100081,China;College of Environmental Science and Engineering,Ocean University of China,Qingdao,266100,China;School of Energy Science and Engineering,Henan Polytechnic University,Jiaozuo,454003,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。